ironic/doc/source/deploy/install-guide.rst

.. _install-guide:

=====================================
Bare Metal Service Installation Guide
=====================================

Service Overview
================

The Bare Metal Service is a collection of components that provides support to
manage and provision physical machines.

Also known as the ``ironic`` project, the Bare Metal Service interacts with
several other OpenStack services such as:

- the Identity Service (keystone) for request authentication and to
  locate other OpenStack services
- the Image Service (glance) from which to retrieve images
- the Networking Service (neutron) for DHCP and network configuration
- the Compute Service (nova), which leverages the Bare Metal Service to
  manage compute instances on bare metal.

The Bare Metal Service includes the following components:

- ironic-api. A RESTful API that processes application requests by sending
  them to the ironic-conductor over RPC.
- ironic-conductor. Adds/edits/deletes nodes; powers on/off nodes with
  ipmi or ssh; provisions/deploys/decommissions bare metal nodes.
- Ironic client. A command-line interface (CLI) for interacting with
  the Bare Metal Service.

Additionally, the Bare Metal Servive has certain external dependencies, which are
very similar to other OpenStack Services:

- A database to store hardware information and state. You can set the database
  backend type and location. A simple approach is to use the same database
  backend as the Compute Service. Another approach is to use a separate
  database backend to further isolate bare metal resources (and associated
  metadata) from users.
- A queue. A central hub for passing messages. It should use the same
  implementation as that of the Compute Service (typically RabbitMQ).

Install and Configure Prerequisites
===================================

The Bare Metal Service is a collection of components that provides support to
manage and provision physical machines. You can configure these components to
run on separate nodes or the same node. In this guide, the components run on
one node, typically the Compute Service's compute node.

This section shows you how to install and configure the components.

It assumes that the Identity Service, Image Service, Compute Service, and
Networking Service have already been set up.

Configure Identity Service for Bare Metal
-----------------------------------------

#. Create the Bare Metal service user (eg ``ironic``). The service uses this to
   authenticate with the Identity Service. Use the ``service`` tenant and
   give the user the ``admin`` role::

    keystone user-create --name=ironic --pass=IRONIC_PASSWORD --email=ironic@example.com
    keystone user-role-add --user=ironic --tenant=service --role=admin

#. You must register the Bare Metal Service with the Identity Service so that
   other OpenStack services can locate it. To register the service::

    keystone service-create --name=ironic --type=baremetal \
    --description="Ironic bare metal provisioning service"

#. Use the ``id`` property that is returned from the Identity Service when registering
   the service (above), to create the endpoint, and replace IRONIC_NODE
   with your Bare Metal Service's API node::

    keystone endpoint-create \
    --service-id=the_service_id_above \
    --publicurl=http://IRONIC_NODE:6385 \
    --internalurl=http://IRONIC_NODE:6385 \
    --adminurl=http://IRONIC_NODE:6385

Set up the Database for Bare Metal
----------------------------------

The Bare Metal Service stores information in a database. This guide uses the
MySQL database that is used by other OpenStack services.

#. In MySQL, create an ``ironic`` database that is accessible by the
   ``ironic`` user. Replace IRONIC_DBPASSWORD
   with the actual password::

    # mysql -u root -p
    mysql> CREATE DATABASE ironic CHARACTER SET utf8;
    mysql> GRANT ALL PRIVILEGES ON ironic.* TO 'ironic'@'localhost' \
    IDENTIFIED BY 'IRONIC_DBPASSWORD';
    mysql> GRANT ALL PRIVILEGES ON ironic.* TO 'ironic'@'%' \
    IDENTIFIED BY 'IRONIC_DBPASSWORD';

Install the Bare Metal Service
------------------------------

#. Install from packages::

    # Available in Ubuntu 14.04 (trusty)
    apt-get install ironic-api ironic-conductor python-ironicclient

Configure the Bare Metal Service
================================

The Bare Metal Service is configured via its configuration file. This file
is typically located at ``/etc/ironic/ironic.conf``.

Although some configuration options are mentioned here, it is recommended that
you review all the available options so that the Bare Metal Service is
configured for your needs.

#. The Bare Metal Service stores information in a database. This guide uses the
   MySQL database that is used by other OpenStack services.

   Configure the location of the database via the ``connection`` option. In the
   following, replace IRONIC_DBPASSWORD with the password of your ``ironic``
   user, and replace DB_IP with the IP address where the DB server is located::

    [database]
    ...

    # The SQLAlchemy connection string used to connect to the
    # database (string value)
    #connection=<None>
    connection = mysql://ironic:IRONIC_DBPASSWORD@DB_IP/ironic?charset=utf8

#. Configure the Bare Metal Service to use the RabbitMQ message broker by
   setting one or more of these options. Replace RABBIT_HOST with the
   address of the RabbitMQ server.::

    [DEFAULT]
    ...
    # The RabbitMQ broker address where a single node is used
    # (string value)
    rabbit_host=RABBIT_HOST

    # The RabbitMQ userid (string value)
    #rabbit_userid=guest

    # The RabbitMQ password (string value)
    #rabbit_password=guest

    # The RabbitMQ virtual host (string value)
    #rabbit_virtual_host=/

#. Configure the Bare Metal Service to use these credentials with the Identity
   Service. Replace IDENTITY_IP with the IP of the Identity server, and
   replace IRONIC_PASSWORD with the password you chose for the ``ironic``
   user in the Identity Service::

    [DEFAULT]
    ...
    # Method to use for authentication: noauth or keystone.
    # (string value)
    auth_strategy=keystone

    ...
    [keystone_authtoken]

    # Host providing the admin Identity API endpoint (string
    # value)
    #auth_host=127.0.0.1
    auth_host=IDENTITY_IP

    # Port of the admin Identity API endpoint (integer value)
    #auth_port=35357

    # Protocol of the admin Identity API endpoint(http or https)
    # (string value)
    #auth_protocol=https

    # Complete public Identity API endpoint (string value)
    #auth_uri=<None>
    auth_uri=http://IDENTITY_IP:5000/

    # Keystone account username (string value)
    #admin_user=<None>
    admin_user=ironic

    # Keystone account password (string value)
    #admin_password=<None>
    admin_password=IRONIC_PASSWORD

    # Keystone service account tenant name to validate user tokens
    # (string value)
    #admin_tenant_name=admin
    admin_tenant_name=service

    # Directory used to cache files related to PKI tokens (string
    # value)
    #signing_dir=<None>

#. Set the URL (replace NEUTRON_IP) for connecting to the Networking service, to be the
   Networking service endpoint::

    [neutron]

    # URL for connecting to neutron. (string value)
    #url=http://127.0.0.1:9696
    url=http://NEUTRON_IP:9696

#. Configure the Bare Metal Service so that it can communicate with the
   Image Service. Replace GLANCE_IP with the hostname or IP address of
   the Image Service::

    [glance]

    # A list of URL schemes that can be downloaded directly via
    # the direct_url.  Currently supported schemes: [file]. (list
    # value)
    #allowed_direct_url_schemes=

    # Default glance hostname or IP address. (string value)
    #glance_host=$my_ip
    glance_host=GLANCE_IP

    # Default glance port. (integer value)
    #glance_port=9292

    # Default protocol to use when connecting to glance. Set to
    # https for SSL. (string value)
    #glance_protocol=http

    # A list of the glance api servers available to nova. Prefix
    # with https:// for SSL-based glance API servers. Format is
    # [hostname|IP]:port. (string value)
    #glance_api_servers=<None>


#. Create the Bare Metal Service database tables::

    ironic-dbsync --config-file /etc/ironic/ironic.conf create_schema

#. Restart the Bare Metal Service::

    service ironic-api restart
    service ironic-conductor restart


Configure Compute Service to use the Bare Metal Service
=======================================================

The Compute Service needs to be configured to use the Bare Metal Service's
driver.  The configuration file for the Compute Service is typically located at
``/etc/nova/nova.conf``. *This configuration file must be modified on the
Compute Service's controller nodes and compute nodes.*

1. Change these configuration options in the ``default`` section, as follows::

    [default]

    # Driver to use for controlling virtualization. Options
    # include: libvirt.LibvirtDriver, xenapi.XenAPIDriver,
    # fake.FakeDriver, baremetal.BareMetalDriver,
    # vmwareapi.VMwareESXDriver, vmwareapi.VMwareVCDriver (string
    # value)
    #compute_driver=<None>
    compute_driver=nova.virt.ironic.IronicDriver

    # Firewall driver (defaults to hypervisor specific iptables
    # driver) (string value)
    #firewall_driver=<None>
    firewall_driver=nova.virt.firewall.NoopFirewallDriver

    # The scheduler host manager class to use (string value)
    #scheduler_host_manager=nova.scheduler.host_manager.HostManager
    scheduler_host_manager=nova.scheduler.ironic_host_manager.IronicHostManager

    # Virtual ram to physical ram allocation ratio which affects
    # all ram filters. This configuration specifies a global ratio
    # for RamFilter. For AggregateRamFilter, it will fall back to
    # this configuration value if no per-aggregate setting found.
    # (floating point value)
    #ram_allocation_ratio=1.5
    ram_allocation_ratio=1.0

    # Amount of disk in MB to reserve for the host (integer value)
    #reserved_host_disk_mb=0
    reserved_host_memory_mb=0

    # Full class name for the Manager for compute (string value)
    #compute_manager=nova.compute.manager.ComputeManager
    compute_manager=ironic.nova.compute.manager.ClusteredComputeManager

2. Change these configuration options in the ``ironic`` section.
   Replace:

   - IRONIC_PASSWORD with the password you chose for the ``ironic``
     user in the Identity Service
   - IRONIC_NODE with the hostname or IP address of the ironic-api node
   - IDENTITY_IP with the IP of the Identity server

  ::

    [ironic]

    # Ironic keystone admin name
    admin_username=ironic

    #Ironic keystone admin password.
    admin_password=IRONIC_PASSWORD

    # keystone API endpoint
    admin_url=http://IDENTITY_IP:35357/v2.0

    # Ironic keystone tenant name.
    admin_tenant_name=service

    # URL for Ironic API endpoint.
    api_endpoint=http://IRONIC_NODE:6385/v1

3. On the Compute Service's controller nodes, restart ``nova-scheduler`` process::

    service nova-scheduler restart

4. On the Compute Service's compute nodes, restart the ``nova-compute`` process::

    service nova-compute restart


Setup the drivers for Bare Metal Service
========================================

PXE Setup
---------

If you will be using PXE, it needs to be set up on the Bare Metal Service
node(s) where ``ironic-conductor`` is running.

#. Make sure the tftp root directory exist and can be written to by the
   user the ``ironic-conductor`` is running as. For example::

    sudo mkdir -p /tftpboot
    sudo chown -R ironic -p /tftpboot

#. Install the syslinux package with the PXE boot images::

    Ubuntu:
        sudo apt-get install syslinux syslinux-common

    Fedora/RHEL:
        sudo yum install syslinux-tftpboot

#. Copy the PXE image to ``/tftpboot``. The PXE image might be found at [1]_::

    Ubuntu:
        sudo cp /usr/lib/syslinux/pxelinux.0 /tftpboot

#. If the version of syslinux is **greater than** 4 we also need to make sure
   that we copy the library modules into the ``/tftpboot`` directory [2]_
   [1]_::

    Ubuntu:
        sudo cp /usr/lib/syslinux/modules/*/ldlinux.* /tftpboot


.. [1] On **Fedora/RHEL** the ``syslinux-tftpboot`` package already install
       the library modules and PXE image at ``/tftpboot``. If the TFTP server
       is configured to listen to a different directory you should copy the
       contents of ``/tftpboot`` to the configured directory
.. [2] http://www.syslinux.org/wiki/index.php/Library_modules

iPXE Setup
----------

An alternative to PXE boot, iPXE was introduced in the Juno release
(2014.2.0) of Ironic.

If you will be using iPXE to boot instead of PXE, iPXE needs to be set up
on the Bare Metal Service node(s) where ``ironic-conductor`` is running.

1. Make sure these directories exist and can be written to by the user
   the ``ironic-conductor`` is running as. For example::

    sudo mkdir -p /tftpboot
    sudo mkdir -p /httpboot
    sudo chown -R ironic -p /tftpboot
    sudo chown -R ironic -p /httpboot


2. Set up TFTP and HTTP servers.

  These servers should be running and configured to use the local
  /tftpboot and /httpboot directories respectively, as their root
  directories. (Setting up these servers is outside the scope of this
  install guide.)

  These root directories need to be mounted locally to the
  ``ironic-conductor`` services, so that the services can access them.

  The Bare Metal Service's configuration file (/etc/ironic/ironic.conf)
  should be edited accordingly to specify the TFTP and HTTP root
  directories and server addresses. For example::

    [pxe]

    # Ironic compute node's http root path. (string value)
    http_root=/httpboot

    # Ironic compute node's tftp root path. (string value)
    tftp_root=/tftpboot

    # IP address of Ironic compute node's tftp server. (string
    # value)
    tftp_server=192.168.0.2

    # Ironic compute node's HTTP server URL. Example:
    # http://192.1.2.3:8080 (string value)
    http_url=http://192.168.0.2:8080


3. Install the iPXE package with the boot images::

    Ubuntu:
        apt-get install ipxe

    Fedora/RHEL:
        yum install ipxe-bootimgs

4. Copy the iPXE boot image (undionly.kpxe) to ``/tftpboot``. The binary
   might be found at::

    Ubuntu:
        cp /usr/lib/ipxe/undionly.kpxe /tftpboot

    Fedora/RHEL:
        cp /usr/share/ipxe/undionly.kpxe /tftpboot

*Note: If the packaged version of the iPXE boot image doesn't
work for you or you want to build one from source take a look at
http://ipxe.org/download for more information on preparing iPXE image.*

5. Enable/Configure iPXE in the Bare Metal Service's configuration file
   (/etc/ironic/ironic.conf)::

    [pxe]

    # Enable iPXE boot. (boolean value)
    ipxe_enabled=True

    # Neutron bootfile DHCP parameter. (string value)
    pxe_bootfile_name=undionly.kpxe

    # Template file for PXE configuration. (string value)
    pxe_config_template=$pybasedir/drivers/modules/ipxe_config.template

6. Restart the ``ironic-conductor`` process::

    service ironic-conductor restart

IPMI support
------------

If using the IPMITool driver, the ``ipmitool`` command must be present on the
service node(s) where ``ironic-conductor`` is running. On most distros, this
is provided as part of the ``ipmitool`` package. Source code is available at
http://ipmitool.sourceforge.net/

Note that certain distros, notably Mac OS X and SLES, install ``openipmi``
instead of ``ipmitool`` by default. THIS DRIVER IS NOT COMPATIBLE WITH
``openipmi`` AS IT RELIES ON ERROR HANDLING OPTIONS NOT PROVIDED BY THIS TOOL.

Ironic supports sending IPMI sensor data to Ceilometer with pxe_ipmitool, 
pxe_ipminative, agent_ipmitool, agent_pyghmi, agent_ilo, iscsi_ilo and pxe_ilo
drivers. By default, support for sending IPMI sensor data to Ceilometer is 
disabled. If you want to enable it set the following options in the
``conductor`` section of ``ironic.conf``:

* notification_driver=messaging
* send_sensor_data=true

If you want to customize the sensor types which will be sent to Ceilometer,
change the ``send_sensor_data_types`` option. For example, the below settings
will send Temperature,Fan,Voltage these three sensor types data to Ceilometer:

* send_sensor_data_types=Temperature,Fan,Voltage

Else we use default value 'All' for all the sensor types which supported by
Ceilometer, they are:

* Temperature,Fan,Voltage,Current