030304d7c2
This patch adds a new driver combination/entrypoint so that the Iboot power driver can be used with an IPA agent based deployment workflow. Change-Id: I677e60a333ec65cbd2852270fb091f17428e5e36 Closes-bug: #1514439
77 lines
2.1 KiB
ReStructuredText
77 lines
2.1 KiB
ReStructuredText
.. _IBOOT:
|
|
|
|
============
|
|
iBoot driver
|
|
============
|
|
|
|
Overview
|
|
========
|
|
The iBoot power driver enables you to take advantage of power cycle
|
|
management of nodes using Dataprobe iBoot devices over the DxP protocol.
|
|
|
|
Drivers
|
|
=======
|
|
|
|
There are two iboot drivers:
|
|
|
|
* The ``pxe_iboot`` driver uses iBoot to control the power state of the
|
|
node, PXE/iPXE technology for booting and the iSCSI methodology for
|
|
deploying the node.
|
|
|
|
* The ``agent_iboot`` driver uses iBoot to control the power state of the
|
|
node, PXE/iPXE technology for booting and the Ironic Python Agent for
|
|
deploying an image to the node.
|
|
|
|
Requirements
|
|
~~~~~~~~~~~~
|
|
|
|
* ``python-iboot`` library should be installed - https://github.com/darkip/python-iboot
|
|
|
|
Tested platforms
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
* iBoot-G2
|
|
|
|
Configuring and enabling the driver
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
1. Add ``pxe_iboot`` and/or ``agent_iboot`` to the list of ``enabled_drivers``
|
|
in */etc/ironic/ironic.conf*. For example::
|
|
|
|
[DEFAULT]
|
|
...
|
|
enabled_drivers = pxe_iboot,agent_iboot
|
|
|
|
2. Restart the Ironic conductor service::
|
|
|
|
service ironic-conductor restart
|
|
|
|
Registering a node with the iBoot driver
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Nodes configured for the iBoot driver should have the ``driver`` property
|
|
set to ``pxe_iboot`` or ``agent_iboot``.
|
|
|
|
The following configuration values are also required in ``driver_info``:
|
|
|
|
- ``iboot_address``: The IP address of the iBoot PDU.
|
|
- ``iboot_username``: User name used for authentication.
|
|
- ``iboot_password``: Password used for authentication.
|
|
|
|
In addition, there are optional properties in ``driver_info``:
|
|
|
|
- ``iboot_port``: iBoot PDU port. Defaults to 9100.
|
|
- ``iboot_relay_id``: iBoot PDU relay ID. This option is useful in order
|
|
to support multiple nodes attached to a single PDU. Defaults to 1.
|
|
|
|
The following sequence of commands can be used to enroll a node with
|
|
the iBoot driver.
|
|
|
|
1. Create node::
|
|
|
|
ironic node-create -d pxe_iboot -i iboot_username=<username> -i iboot_password=<password> -i iboot_address=<address>
|
|
|
|
References
|
|
==========
|
|
.. [1] iBoot-G2 official documentation - http://dataprobe.com/support_iboot-g2.html
|