openstack/ironic
Code Issues Proposed changes
fc4817d5b6
ironic/doc/source/drivers/vbox.rst
Ramakrishnan G cb7dcca028 Update pyremotevbox documentation 
This commit updates the suggested version of
pyremotevbox to 0.5.0 which removes the requirement
to install a ZSI library separately. This is important
because some distributions don't have this packaged.

Change-Id: I59e2418a735830409891e84fcc048b4005241cad
2015-05-22 02:14:38 +00:00

4.5 KiB
Raw Blame History

VirtualBox drivers

Overview

VirtualBox drivers can be used to test Ironic by using VirtualBox VMs to simulate bare metal nodes.

Ironic provides support via the pxe_ssh and agent_ssh drivers for using a VirtualBox VM as a bare metal target and do provisioning on it. It works by connecting via SSH into the VirtualBox host and running commands using VBoxManage. This works well if you have VirtualBox installed on a Linux box. But when VirtualBox is installed on a Windows box, configuring and getting SSH to work with VBoxManage is difficult (if not impossible) due to the following reasons:

  • Windows doesn't come with native SSH support and one needs to use some third-party software to enable SSH support on Windows.
  • Even after configuring SSH, VBoxManage doesn't work remotely due to how Windows manages user accounts -- the native Windows user account is different from the corresponding SSH user account, and VBoxManage doesn't work properly when done with the SSH user account.
  • Even after tweaking the policies of the VirtualBox application, the remote VBoxManage and VBoxSvc don't sync each other properly and often results in a crash.

VirtualBox drivers use SOAP to talk to the VirtualBox web service running on the VirtualBox host. These drivers are primarily intended for Ironic developers running Windows on their laptops/desktops, although they can be used on other operating systems as well. Using these drivers, a developer could configure a cloud controller on one VirtualBox VM and use other VMs in the same VirtualBox as bare metals for that cloud controller.

These VirtualBox drivers are available :

  • pxe_vbox: uses iSCSI-based deployment mechanism.
  • agent_vbox: uses agent-based deployment mechanism.
  • fake_vbox: uses VirtualBox for power and management, but uses fake deploy.

Setting up development environment

  • Install VirtualBox on your desktop or laptop.

  • Create a VM for the cloud controller. Do not power on the VM now. For example, cloud-controller.

  • In VirtualBox Manager, Select cloud-controller VM -> Click Settings -> Network -> Adapter 2 -> Select 'Enable Network Adapter' -> Select Attached to: Internal Network -> Select Name: intnet

  • Create a VM in VirtualBox to act as bare metal. A VM with 1 CPU, 1 GB memory should be sufficient. Let's name this VM as baremetal.

  • In VirtualBox Manager, Select baremetal VM -> Click Settings -> Network -> Adapter 1 -> Select 'Enable Network Adapter' -> Select Attached to: Internal Network -> Select Name: intnet

  • Configure the VirtualBox web service to disable authentication. (This is only a suggestion. If you want, enable authentication with the appropriate web service authentication library.)

    VBoxManage setproperty websrvauthlibrary null

  • Run VirtualBox web service:

    C:\Program Files\Oracle\VirtualBox\VBoxWebSrv.exe

  • Power on the cloud-controller VM.

  • All the following instructions are to be done in the cloud-controller VM.

  • Install the GNU/Linux distribution of your choice.

  • Set up devstack.

  • Install pyremotevbox:

    sudo pip install "pyremotevbox>=0.5.0"

  • Enable one (or more) of the VirtualBox drivers (pxe_vbox, agent_vbox, or fake_vbox) via the enabled_drivers configuration option in /etc/ironic/ironic.conf, and restart Ironic conductor.

  • Set up flat networking on eth1. For details on how to do this, see NeutronFlatNetworking.

  • Enroll a VirtualBox node. The following examples use the pxe_vbox driver.

    ironic node-create -d pxe_vbox -i virtualbox_host='10.0.2.2' -i virtualbox_vmname='baremetal'

    If you are using authentication with VirtualBox web service, your username and password need to be provided. The ironic node-create command will look like:

    ironic node-create -d pxe_vbox -i virtualbox_host='10.0.2.2' -i virtualbox_vmname='baremetal' -i virtualbox_username=<username> -i virtualbox_password=<password>

    If VirtualBox web service is listening on a different port than the default 18083, then that port may be specified using the driver_info parameter virtualbox_port.

  • Add other Node properties and trigger provisioning on the bare metal node.

    Note

    When a newly created bare metal VM is powered on for the first time by Ironic (during provisioning), VirtualBox will automatically pop up a dialog box asking to 'Select start-up disk'. Just press 'Cancel' to continue booting the VM.