manila/doc/source/contributor/tempest_tests.rst
Goutham Pacha Ravi 45b64631ee [doc] Fix tempest doc
The doc currently refers to an in-tree directory
that we used to have in the distant past.

Also link to config.py and the share backend feature
support matrix where appropriate.

Change-Id: Ic22eba0cedb7c6c7c89ef129a8c6a007d97c7e3b
Signed-off-by: Goutham Pacha Ravi <gouthampravi@gmail.com>
2020-04-27 13:05:49 -07:00

195 lines
5.9 KiB
ReStructuredText

Tempest Tests
=============
Manila's functional API and scenario tests are in the `manila tempest plugin
<https://opendev.org/openstack/manila-tempest-plugin>`_ repository.
Installation of plugin to tempest
---------------------------------
Tempest plugin installation is common for all its plugins and detailed
information can be found in its `docs`_.
In simple words: if you have installed manila project on the same machine as
tempest, then tempest will find it.
In case the plugin is not installed (see the verification steps below),
you can clone and install it yourself.
.. code-block:: console
$ git clone https://opendev.org/openstack/manila-tempest-plugin
$ pip install -e manila-tempest-plugin
.. _docs: https://docs.openstack.org/tempest/latest/plugin.html#using-plugins
Verifying installation
----------------------
To verify that the plugin is installed on your system, run the following
command and find "manila_tests" in its output.
.. code-block:: console
$ tempest list-plugins
Alternatively, or to double-check, list all the tests available on the system
and find manila tests in it.
.. code-block:: console
$ tempest run -l
Configuration of manila-related tests in tempest.conf
-----------------------------------------------------
All config options for manila are defined in `manila_tempest_tests/config.py`_
module. They can be set/redefined in ``tempest.conf`` file.
Here is a configuration example:
.. code-block:: ini
[service_available]
manila = True
[share]
# Capabilities
capability_storage_protocol = NFS
capability_snapshot_support = True
capability_create_share_from_snapshot_support = True
backend_names = Backendname1,BackendName2
backend_replication_type = readable
# Enable/Disable test groups
multi_backend = True
multitenancy_enabled = True
enable_protocols = nfs,cifs,glusterfs,cephfs
enable_ip_rules_for_protocols = nfs
enable_user_rules_for_protocols = cifs
enable_cert_rules_for_protocols = glusterfs
enable_cephx_rules_for_protocols = cephfs
username_for_user_rules = foouser
enable_ro_access_level_for_protocols = nfs
run_quota_tests = True
run_extend_tests = True
run_shrink_tests = True
run_snapshot_tests = True
run_replication_tests = True
run_migration_tests = True
run_manage_unmanage_tests = True
run_manage_unmanage_snapshot_tests = True
.. note::
None of existing share drivers support all features. So, make sure
that share backends really support features you enable in config. See
the :doc:`../admin/share_back_ends_feature_support_mapping` to see what
features are supported by the back end that you are testing.
Running tests
-------------
To run tests, it is required to install `pip`_, `tox`_ and `virtualenv`_
packages on host machine. Then run following command
from tempest root directory:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.api
or to run only scenario tests:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.scenario
.. _pip: https://pypi.org/project/pip/
.. _tox: https://pypi.org/project/tox/
.. _virtualenv: https://pypi.org/project/virtualenv
Running a subset of tests based on test location
------------------------------------------------
Instead of running all tests, you can specify an individual directory, file,
class, or method that contains test code.
To run the tests in the ``manila_tempest_tests/tests/api/admin`` directory:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.api.admin
To run the tests in the
``manila_tempest_tests/tests/api/admin/test_admin_actions.py`` module:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.api.admin.test_admin_actions
To run the tests in the `AdminActionsTest` class in
``manila_tempest_tests/tests/api/admin/test_admin_actions.py`` module:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.api.admin.test_admin_actions.AdminActionsTest
To run the `AdminActionsTest.test_reset_share_state` test method in
``manila_tempest_tests/tests/api/admin/test_admin_actions.py`` module:
.. code-block:: console
$ tempest run -r manila_tempest_tests.tests.api.admin.test_admin_actions.AdminActionsTest.test_reset_share_state
Running a subset of tests based on service involvement
------------------------------------------------------
To run the tests that require only `manila-api` service running:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\bapi\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
To run the tests that require all manila services running,
but intended to test API behaviour:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\b\(api\|api_with_backend\)\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
To run the tests that require all manila services running,
but intended to test back-end (manila-share) behaviour:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\bbackend\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
Running a subset of positive or negative tests
----------------------------------------------
To run only positive tests, use following command:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\bpositive\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
To run only negative tests, use following command:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\bnegative\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
To run only positive API tests, use following command:
.. code-block:: console
$ tempest run -r \
\(\?\=\.\*\\\[\.\*\\bpositive\\b\.\*\\\]\) \
\(\?\=\.\*\\\[\.\*\\bapi\\b\.\*\\\]\) \
\(\^manila_tempest_tests.tests.api\)
.. _manila_tempest_tests/config.py: https://opendev.org/openstack/manila-tempest-plugin/src/branch/master/manila_tempest_tests/config.py