32 KiB
Share replication
Replication of data has a number of use cases in the cloud. One use case is High Availability of the data in a shared file system, used for example, to support a production database. Another use case is ensuring Data Protection; i.e being prepared for a disaster by having a replication location that will be ready to back up your primary data source.
The Shared File System service supports user facing APIs that allow users to create shares that support replication, add and remove share replicas and manage their snapshots and access rules. Three replication types are currently supported and they vary in the semantics associated with the primary share and the secondary copies.
Important
Share replication is an
experimental Shared File Systems API in the Mitaka
release. Contributors can change or remove the experimental part of the
Shared File Systems API in further releases without maintaining backward
compatibility. Experimental APIs have an
X-OpenStack-Manila-API-Experimental: true header in their
HTTP requests.
Replication types supported
Before using share replication, make sure the Shared File System
driver that you are running supports this feature. You can check it in
the manila-scheduler service reports. The
replication_type capability reported can have one of the
following values:
- writable
-
The driver supports creating
writableshare replicas. All share replicas can be accorded read/write access and would be synchronously mirrored. - readable
-
The driver supports creating
read-onlyshare replicas. All secondary share replicas can be accorded read access. Only the primary (oractiveshare replica) can be written into. - dr
-
The driver supports creating
dr(abbreviated from Disaster Recovery) share replicas. A secondary share replica is inaccessible until after apromotion. - None
-
The driver does not support Share Replication.
Note
The term active share replica refers to the
primary share. In writable style of
replication, all share replicas are active, and there could
be no distinction of a primary share. In
readable and dr styles of replication, a
secondary share replica may be referred to as
passive, non-active or simply,
replica.
Configuration
Two new configuration options have been introduced to support Share Replication.
- replica_state_update_interval
-
Specify this option in the
DEFAULTsection of yourmanila.conf. The Shared File Systems service requests periodic update of the replica_state of allnon-activeshare replicas. The update occurs with respect to an interval corresponding to this option. If it is not specified, it defaults to 300 seconds. - replication_domain
-
Specify this option in the backend stanza when using a multi-backend style configuration. The value can be any ASCII string. Two backends that can replicate between each other would have the same
replication_domain. This comes from the premise that the Shared File Systems service expects Share Replication to be performed between symmetric backends. This option is required for using the Share Replication feature.
Health of a share replica
Apart from the status attribute, share replicas have the
replica_state attribute to denote the state of data
replication on the storage backend. The primary share
replica will have it's replica_state
attribute set to active. The
secondary share replicas may have one of the following as
their replica_state:
- in_sync
-
The share replica is up to date with the
activeshare replica (possibly within a backend-specificrecovery point objective). - out_of_sync
-
The share replica is out of date (all new share replicas start out in this
replica_state). - error
-
When the scheduler fails to schedule this share replica or some potentially irrecoverable error occurred with regard to updating data for this replica.
Promotion or failover
For readable and dr types of replication,
we refer to the task of switching a non-active share replica with the
active replica as promotion.
For the writable style of replication, promotion does not
make sense since all share replicas are active (or
writable) at all times.
The status attribute of the non-active
replica being promoted will be set to replication_change
during its promotion. This has been classified as a busy
state and thus API interactions with the share are restricted while one
of its share replicas is in this state.
Share replication workflows
The following examples have been implemented with the ZFSonLinux
driver that is a reference implementation in the Shared File Systems
service. It operates in driver_handles_share_servers=False
mode and supports the readable type of replication. In the
example, we assume a configuration of two Availability Zones1, called availability_zone_1 and availability_zone_2.
Since the Train release, some drivers operating in
driver_handles_share_server=True mode support share
replication.
Multiple availability zones are not necessary to use the replication
feature. However, the use of an availability zone as a
failure domain is encouraged.
Pay attention to the network configuration for the ZFS driver. Here,
we assume a configuration of zfs_service_ip and
zfs_share_export_ip from two separate networks. The service
network is reachable from the host where the manila-share
service is running. The share export IP is from a network that allows
user access.
See Configuring the ZFSonLinux driver <https://docs.openstack.org/manila/latest /configuration/shared-file-systems/drivers/zfs-on-linux-driver.html> for information on how to set up the ZFSonLinux driver.
Creating a share that supports replication
Create a new share type and specify the replication_type as an extra-spec within the share-type being used.
Use the manila type-create command to create a new share
type. Specify the name and the value for the extra-spec
driver_handles_share_servers.
$ manila type-create readable_type_replication False
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| required_extra_specs | driver_handles_share_servers : False |
| Name | readable_type_replication |
| Visibility | public |
| is_default | - |
| ID | 3b3ee3f7-6e43-4aa1-859d-0b0511c43074 |
| optional_extra_specs | snapshot_support : True |
+----------------------+--------------------------------------+Use the manila type-key command to set an extra-spec to
the share type.
$ manila type-key readable_type_replication set replication_type=readableNote
This command has no output. To verify the extra-spec, use the manila extra-specs-list
command and specify the share type's name or ID as a parameter.
Create a share with the share type
Use the manila create command to create a share. Specify
the share protocol, size and the availability zone.
$ manila create NFS 1 --share_type readable_type_replication --name my_share --description "This share will have replicas" --az availability_zone_1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | readable_type_replication |
| description | This share will have replicas |
| availability_zone | availability_zone_1 |
| share_network_id | None |
| share_server_id | None |
| share_group_id | None |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| size | 1 |
| name | my_share |
| share_type | 3b3ee3f7-6e43-4aa1-859d-0b0511c43074 |
| has_replicas | False |
| replication_type | readable |
| created_at | 2016-03-29T20:22:18.000000 |
| share_proto | NFS |
| project_id | 48a5ca76ac69405e99dc1c13c5195186 |
| metadata | {} |
+-----------------------------+--------------------------------------+Note
If you are creating a share with the share type specification
driver_handles_share_servers=True, the share network
parameter is required for the operation to be performed.
Use the manila show command to retrieve details of the
share. Specify the share ID or name as a parameter.
$ manila show my_share
+-----------------------------+--------------------------------------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------------------------------------+
| status | available |
| share_type_name | readable_type_replication |
| description | This share will have replicas |
| availability_zone | availability_zone_1 |
| share_network_id | None |
| export_locations | |
| | path = |
| |10.32.62.26:/alpha/manila_share_38efc042_50c2_4825_a6d8_cba2a8277b28|
| | preferred = False |
| | is_admin_only = False |
| | id = e1d754b5-ec06-42d2-afff-3e98c0013faf |
| | share_instance_id = 38efc042-50c2-4825-a6d8-cba2a8277b28 |
| | path = |
| |172.21.0.23:/alpha/manila_share_38efc042_50c2_4825_a6d8_cba2a8277b28|
| | preferred = False |
| | is_admin_only = True |
| | id = 6f843ecd-a7ea-4939-86de-e1e01d9e8672 |
| | share_instance_id = 38efc042-50c2-4825-a6d8-cba2a8277b28 |
| share_server_id | None |
| share_group_id | None |
| host | openstack4@zfsonlinux_1#alpha |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| size | 1 |
| name | my_share |
| share_type | 3b3ee3f7-6e43-4aa1-859d-0b0511c43074 |
| has_replicas | False |
| replication_type | readable |
| created_at | 2016-03-29T20:22:18.000000 |
| share_proto | NFS |
| project_id | 48a5ca76ac69405e99dc1c13c5195186 |
| metadata | {} |
+-----------------------------+--------------------------------------------------------------------+Note
When you create a share that supports replication, an
active replica is created for you. You can verify this with
the manila share-replica-list command.
From API version 2.53, when creating a replicated share, the manila
quota system will reserve and consume resources for two additional
quotas: share_replicas and
replica_gigabytes.
Creating and promoting share replicas
Create a share replica
Use the manila share-replica-create command to create a
share replica. Specify the share ID or name as a parameter. You may
optionally provide the availability_zone.
$ manila share-replica-create my_share --az availability_zone_2
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| availability_zone | availability_zone_2 |
| created_at | 2016-03-29T20:24:53.148992 |
| updated_at | None |
| share_network_id | None |
| share_server_id | None |
| host | |
| replica_state | None |
| id | 78a5ef96-6c36-42e0-b50b-44efe7c1807e |
+-------------------+--------------------------------------+See details of the newly created share replica
Note
Since API version 2.51 (Train release), a share network is able to
span multiple subnets in different availability zones. So, when using a
share type with specification
driver_handles_share_servers=True, users must ensure that
the share network has a subnet in the availability zone that they desire
the share replica to be created in.
Use the manila share-replica-show command to see details
of the newly created share replica. Specify the share replica's ID as a
parameter.
$ manila share-replica-show 78a5ef96-6c36-42e0-b50b-44efe7c1807e
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | available |
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| availability_zone | availability_zone_2 |
| created_at | 2016-03-29T20:24:53.000000 |
| updated_at | 2016-03-29T20:24:58.000000 |
| share_network_id | None |
| share_server_id | None |
| host | openstack4@zfsonlinux_2#beta |
| replica_state | in_sync |
| id | 78a5ef96-6c36-42e0-b50b-44efe7c1807e |
+-------------------+--------------------------------------+See all replicas of the share
Use the manila share-replica-list command to see all the
replicas of the share. Specify the share ID or name as an optional
parameter.
$ manila share-replica-list --share-id my_share
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| 38efc042-50c2-4825-a6d8-cba2a8277b28 | available | active | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_1#alpha | availability_zone_1 | 2016-03-29T20:22:19.000000 |
| 78a5ef96-6c36-42e0-b50b-44efe7c1807e | available | in_sync | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_2#beta | availability_zone_2 | 2016-03-29T20:24:58.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+Promote the secondary share replica to be the new active replica
Use the manila share-replica-promote command to promote a
non-active share replica to become the active replica.
Specify the non-active replica's ID as a parameter.
$ manila share-replica-promote 78a5ef96-6c36-42e0-b50b-44efe7c1807eNote
This command has no output.
The promotion may take time. During the promotion, the
replica_state attribute of the share replica being promoted
will be set to replication_change.
$ manila share-replica-list --share-id my_share
+--------------------------------------+-----------+--------------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+--------------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| 38efc042-50c2-4825-a6d8-cba2a8277b28 | available | active | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_1#alpha | availability_zone_1 | 2016-03-29T20:32:19.000000 |
| 78a5ef96-6c36-42e0-b50b-44efe7c1807e | available | replication_change | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_2#beta | availability_zone_2 | 2016-03-29T20:32:19.000000 |
+--------------------------------------+-----------+--------------------+--------------------------------------+-------------------------------+---------------------+----------------------------+Once the promotion is complete, the replica_state will
be set to active.
$ manila share-replica-list --share-id my_share
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+
| 38efc042-50c2-4825-a6d8-cba2a8277b28 | available | in_sync | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_1#alpha | availability_zone_1 | 2016-03-29T20:32:19.000000 |
| 78a5ef96-6c36-42e0-b50b-44efe7c1807e | available | active | e496ed61-8f2e-436b-b299-32c3e90991cc | openstack4@zfsonlinux_2#beta | availability_zone_2 | 2016-03-29T20:32:19.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------+---------------------+----------------------------+Access rules
Create an IP access rule for the share
Use the manila access-allow command to add an access rule.
Specify the share ID or name, protocol and the target as parameters.
$ manila access-allow my_share ip 0.0.0.0/0 --access-level rw
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| access_type | ip |
| access_to | 0.0.0.0/0 |
| access_level | rw |
| state | new |
| id | 8b339cdc-c1e0-448f-bf6d-f068ee6e8f45 |
+--------------+--------------------------------------+Note
Access rules are not meant to be different across the replicas of the
share. However, as per the type of replication, drivers may choose to
modify the access level prescribed. In the above example, even though
read/write access was requested for the share, the driver will provide
read-only access to the non-active replica to the same target, because
of the semantics of the replication type: readable.
However, the target will have read/write access to the (currently)
non-active replica when it is promoted to become the active
replica.
The manila access-deny command can be used to remove a
previously applied access rule.
List the export locations of the share
Use the manila share-export-locations-list command to list
the export locations of a share.
$ manila share-export-location-list my_share
+--------------------------------------+---------------------------------------------------------------------------+-----------+
| ID | Path | Preferred |
+--------------------------------------+---------------------------------------------------------------------------+-----------+
| 3ed3fbf5-2fa1-4dc0-8440-a0af72398cb6 | 10.32.62.21:/beta/subdir/manila_share_78a5ef96_6c36_42e0_b50b_44efe7c1807e| False |
| 6f843ecd-a7ea-4939-86de-e1e01d9e8672 | 172.21.0.23:/alpha/manila_share_38efc042_50c2_4825_a6d8_cba2a8277b28 | False |
| e1d754b5-ec06-42d2-afff-3e98c0013faf | 10.32.62.26:/alpha/manila_share_38efc042_50c2_4825_a6d8_cba2a8277b28 | False |
| f3c5585f-c2f7-4264-91a7-a4a1e754e686 | 172.21.0.29:/beta/subdir/manila_share_78a5ef96_6c36_42e0_b50b_44efe7c1807e| False |
+--------------------------------------+---------------------------------------------------------------------------+-----------+Identify the export location corresponding to the share replica on the user accessible network and you may mount it on the target node.
Note
As an administrator, you can list the export locations for a
particular share replica by using the manila share-instance-export-location-list command
and specifying the share replica's ID as a parameter.
Snapshots
Create a snapshot of the share
Use the manila snapshot-create command to create a
snapshot of the share. Specify the share ID or name as a parameter.
$ manila snapshot-create my_share --name "my_snapshot"
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| user_id | 5c7bdb6eb0504d54a619acf8375c08ce |
| description | None |
| created_at | 2016-03-29T21:14:03.000000 |
| share_proto | NFS |
| provider_location | None |
| id | 06cdccaf-93a0-4e57-9a39-79fb1929c649 |
| project_id | cadd7139bc3148b8973df097c0911016 |
| size | 1 |
| share_size | 1 |
| name | my_snapshot |
+-------------------+--------------------------------------+Show the details of the snapshot
Use the manila snapshot-show to view details of a
snapshot. Specify the snapshot ID or name as a parameter.
$ manila snapshot-show my_snapshot
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | available |
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| user_id | 5c7bdb6eb0504d54a619acf8375c08ce |
| description | None |
| created_at | 2016-03-29T21:14:03.000000 |
| share_proto | NFS |
| provider_location | None |
| id | 06cdccaf-93a0-4e57-9a39-79fb1929c649 |
| project_id | cadd7139bc3148b8973df097c0911016 |
| size | 1 |
| share_size | 1 |
| name | my_snapshot |
+-------------------+--------------------------------------+Note
The status attribute of a snapshot will transition from
creating to available only when it is present
on all the share replicas that have their replica_state
attribute set to active or in_sync.
Likewise, the replica_state attribute of a share replica
will transition from out_of_sync to in_sync
only when all available snapshots are present on it.
Planned failovers
As an administrator, you can use the manila share-replica-resync command to attempt to
sync data between active and non-active share
replicas of a share before promotion. This will ensure that share
replicas have the most up-to-date data and their relationships can be
safely switched.
$ manila share-replica-resync 38efc042-50c2-4825-a6d8-cba2a8277b28Note
This command has no output.
Updating attributes
If an error occurs while updating data or replication relationships
(during a promotion), the Shared File Systems service may
not be able to determine the consistency or health of a share replica.
It may require administrator intervention to make any fixes on the
storage backend as necessary. In such a situation, state correction
within the Shared File Systems service is possible.
As an administrator, you can:
Reset the status attribute of a share replica
Use the manila share-replica-reset-state command to reset
the status attribute. Specify the share replica's ID as a
parameter and use the --state option to specify the state
intended.
$ manila share-replica-reset-state 38efc042-50c2-4825-a6d8-cba2a8277b28 --state=availableNote
This command has no output.
Reset the replica_state attribute
Use the manila share-replica-reset-replica-state command
to reset the replica_state attribute. Specify the share
replica's ID and use the --state option to specify the
state intended.
$ manila share-replica-reset-replica-state 38efc042-50c2-4825-a6d8-cba2a8277b28 --state=out_of_syncNote
This command has no output.
Force delete a specified share replica in any state
Use the manila share-replica-delete command with the
'--force' key to remove the share replica, regardless of the state it is
in.
$ manila share-replica-show 9513de5d-0384-4528-89fb-957dd9b57680
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | error |
| share_id | e496ed61-8f2e-436b-b299-32c3e90991cc |
| availability_zone | availability_zone_1 |
| created_at | 2016-03-30T01:32:47.000000 |
| updated_at | 2016-03-30T01:34:25.000000 |
| share_network_id | None |
| share_server_id | None |
| host | openstack4@zfsonlinux_1#alpha |
| replica_state | out_of_sync |
| id | 38efc042-50c2-4825-a6d8-cba2a8277b28 |
+-------------------+--------------------------------------+
$ manila share-replica-delete --force 38efc042-50c2-4825-a6d8-cba2a8277b28Note
This command has no output.
Use the policy.json file to grant permissions for these
actions to other roles.
Deleting share replicas
Use the manila share-replica-delete command with the share
replica's ID to delete a share replica.
$ manila share-replica-delete 38efc042-50c2-4825-a6d8-cba2a8277b28Note
This command has no output.
Note
You cannot delete the last active replica with this
command. You should use the manila delete command to remove the share.
When running in a multi-backend configuration, until the Stein release, deployers could only configure one Availability Zone per manila configuration file. This is achieved with the option
storage_availability_zonedefined under the[DEFAULT]section.Beyond the Stein release, the option
backend_availability_zonecan be specified in each back end stanza. The value of this configuration option will override any configuration of thestorage_availability_zonefrom the[DEFAULT]section.↩︎