f723dfadee
Current URL of network configuration guide for Red Hat Enterprise Linux and CentOS is incorrect Change-Id: I9098801c6e87a58ac907784c4c1f68651c5c6ae1 Closes-Bug: 1737313
3.6 KiB
Host networking
After installing the operating system on each node for the architecture that you choose to deploy, you must configure the network interfaces. We recommend that you disable any automated network management tools and manually edit the appropriate configuration files for your distribution. For more information on how to configure networking on your distribution, see the documentation .
All nodes require Internet access for administrative purposes such as package installation, security updates, Domain Name System (DNS), and Network Time Protocol (NTP). In most cases, nodes should obtain Internet access through the management network interface. To highlight the importance of network separation, the example architectures use private address space for the management network and assume that the physical network infrastructure provides Internet access via Network Address Translation (NAT) or other methods. The example architectures use routable IP address space for the provider (external) network and assume that the physical network infrastructure provides direct Internet access.
In the provider networks architecture, all instances attach directly to the provider network. In the self-service (private) networks architecture, instances can attach to a self-service or provider network. Self-service networks can reside entirely within OpenStack or provide some level of external network access using Network Address Translation (NAT) through the provider network.
The example architectures assume use of the following networks:
Management on 10.0.0.0/24 with gateway 10.0.0.1
This network requires a gateway to provide Internet access to all nodes for administrative purposes such as package installation, security updates, Domain Name System (DNS), and Network Time Protocol (NTP).
Provider on 203.0.113.0/24 with gateway 203.0.113.1
This network requires a gateway to provide Internet access to instances in your OpenStack environment.
You can modify these ranges and gateways to work with your particular network infrastructure.
Network interface names vary by distribution. Traditionally,
interfaces use eth followed by a sequential number. To
cover all variations, this guide refers to the first interface as the
interface with the lowest number and the second interface as the
interface with the highest number.
Unless you intend to use the exact configuration provided in this
example architecture, you must modify the networks in this procedure to
match your environment. Each node must resolve the other nodes by name
in addition to IP address. For example, the controller name
must resolve to 10.0.0.11, the IP address of the management
interface on the controller node.
Warning
Reconfiguring network interfaces will interrupt network connectivity. We recommend using a local terminal session for these procedures.
Note
Your distribution enables a restrictive firewall by default. During the installation process, certain steps will fail unless you alter or disable the firewall. For more information about securing your environment, refer to the OpenStack Security Guide.
environment-networking-controller-rdo.rst environment-networking-compute-rdo.rst environment-networking-storage-cinder.rst environment-networking-verify-rdo.rst