openstack/openstack-manuals
Code Issues Proposed changes
06dc63f4e1
openstack-manuals/doc/install-guide/source/launch-instance-manila.rst
Matthew Kassawara d3cafcade6 Install: Simplify OpenRC files 
Simplify OpenRC files by removing the '.sh' suffix and
using '.' instead of 'source' to load them.

Change-Id: Ic553ea10ac4f3958525c97bbda02ebe7d4bac24f
Implements: bp installguide-mitaka
2016-03-23 13:38:36 -06:00

10 KiB
Raw Blame History

Shared File Systems

Before being able to create a share, the manila with the generic driver and the DHSS mode enabled requires the definition of at least an image, a network and a share-network for being used to create a share server. For that back end configuration, the share server is an instance where NFS/CIFS shares are served.

Note

This configuration automatically creates a cinder volume for every share. The cinder volumes are attached to share servers according to the definition of a share network.

Determine the configuration of the share server

  1. Source the admin credentials to gain access to admin-only CLI commands:

    $ . admin-openrc

  2. Create a default share type before running manila-share service:

    $ manila type-create default_share_type True
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+$
| ID                                   | Name               | Visibility | is_default | required_extra_specs                | optional_extra_specs    |$
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+$
| 8a35da28-0f74-490d-afff-23664ecd4f01 | default_share_type | public     | -          | driver_handles_share_servers : True | snapshot_support : True |$
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+$

  3. Create a manila share server image to the Image service:

    $ glance image-create \
--copy-from http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2 \
--name "manila-service-image" \
--disk-format qcow2 \
--container-format bare \
--visibility public --progress
[=============================>] 100%
+------------------+--------------------------------------+
| Property         | Value                                |
+------------------+--------------------------------------+
| checksum         | 48a08e746cf0986e2bc32040a9183445     |
| container_format | bare                                 |
| created_at       | 2016-01-26T19:52:24Z                 |
| disk_format      | qcow2                                |
| id               | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c |
| min_disk         | 0                                    |
| min_ram          | 0                                    |
| name             | manila-service-image                 |
| owner            | e2c965830ecc4162a002bf16ddc91ab7     |
| protected        | False                                |
| size             | 306577408                            |
| status           | active                               |
| tags             | []                                   |
| updated_at       | 2016-01-26T19:52:28Z                 |
| virtual_size     | None                                 |
| visibility       | public                               |
+------------------+--------------------------------------+

  4. List available networks in order to get id and subnets of the private network:

    $ neutron net-list
+--------------------------------------+---------+----------------------------------------------------+
| id                                   | name    | subnets                                            |
+--------------------------------------+---------+----------------------------------------------------+
| 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public  | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24  |
| 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 |
+--------------------------------------+---------+----------------------------------------------------+

  5. Source the demo credentials to perform the following steps as a non-administrative project:

    $ . demo-openrc
    $ manila share-network-create --name demo-share-network1 \
--neutron-net-id PRIVATE_NETWORK_ID \
--neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID
+-------------------+--------------------------------------+
| Property          | Value                                |
+-------------------+--------------------------------------+
| name              | demo-share-network1                  |
| segmentation_id   | None                                 |
| created_at        | 2016-01-26T20:03:41.877838           |
| neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 |
| updated_at        | None                                 |
| network_type      | None                                 |
| neutron_net_id    | 7c6f9b37-76b4-463e-98d8-27e5686ed083 |
| ip_version        | None                                 |
| nova_net_id       | None                                 |
| cidr              | None                                 |
| project_id        | e2c965830ecc4162a002bf16ddc91ab7     |
| id                | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| description       | None                                 |
+-------------------+--------------------------------------+

Create a share

  1. Create a NFS share using the share network:

    $ manila create NFS 1 --name demo-share1 --share-network demo-share-network1
+-----------------------------+--------------------------------------+
| Property                    | Value                                |
+-----------------------------+--------------------------------------+
| status                      | None                                 |
| share_type_name             | None                                 |
| description                 | None                                 |
| availability_zone           | None                                 |
| share_network_id            | None                                 |
| export_locations            | []                                   |
| host                        | None                                 |
| snapshot_id                 | None                                 |
| is_public                   | False                                |
| task_state                  | None                                 |
| snapshot_support            | True                                 |
| id                          | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c |
| size                        | 1                                    |
| name                        | demo-share1                          |
| share_type                  | None                                 |
| created_at                  | 2016-01-26T20:08:50.502877           |
| export_location             | None                                 |
| share_proto                 | NFS                                  |
| consistency_group_id        | None                                 |
| source_cgsnapshot_member_id | None                                 |
| project_id                  | 48e8c35b2ac6495d86d4be61658975e7     |
| metadata                    | {}                                   |
+-----------------------------+--------------------------------------+

  2. After some time, the share status should change from creating to available:

    $ manila list
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| ID                                   | Name        | Size | Share Proto | Status    | Is Public | Share Type                           | Export location                                               | Host                        | Availability Zone |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| 5f8a0574-a95e-40ff-b898-09fd8d6a1fac | demo-share1 | 1    | NFS         | available | False     | 8a35da28-0f74-490d-afff-23664ecd4f01 | 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 | storagenode@generic#GENERIC | nova              |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+

  3. Configure user access to the new share before attempting to mount it via the network:

    The image used for launching an instance and mounting a share must have the NFS packages provided by the distro. Example: The cirros image created at the image service section is not enough.

    Use an instance that is connected to the private network used to create the share-network.

    $ manila access-allow demo-share1 ip INSTANCE_PRIVATE_NETWORK_IP

Mount the share from an instance

  1. Create a folder where the mount will be placed:

    $ mkdir ~/test_folder

  2. Mount the NFS share in the instance using the export location of the share:

    $ mount -v 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 ~/test_folder

For more information about how to manage shares, see the OpenStack User Guide.

Return to launch-instance.