openstack-manuals/doc/install-guide/source/environment-networking-verify.rst
Matthew Kassawara 677d910899 [install] Fix environment structure
Address various structure and consistency issues with
environment content.

This patch only addresses the critical structure and
consistency problems that impact usability. A future
patch should address the larger, but less obvious problems
that mostly appeared during the RST conversion.

Change-Id: Iae586b4cc8943abedca3c09820d0fb5370b5a858
Implements: blueprint installguide-liberty
2015-10-05 14:10:11 -05:00

85 lines
3.3 KiB
ReStructuredText

Verify connectivity
-------------------
We recommend that you verify network connectivity to the Internet and
among the nodes before proceeding further.
#. From the *controller* node, test access to the Internet:
.. code-block:: console
# ping -c 4 openstack.org
PING openstack.org (174.143.194.225) 56(84) bytes of data.
64 bytes from 174.143.194.225: icmp_seq=1 ttl=54 time=18.3 ms
64 bytes from 174.143.194.225: icmp_seq=2 ttl=54 time=17.5 ms
64 bytes from 174.143.194.225: icmp_seq=3 ttl=54 time=17.5 ms
64 bytes from 174.143.194.225: icmp_seq=4 ttl=54 time=17.4 ms
--- openstack.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3022ms
rtt min/avg/max/mdev = 17.489/17.715/18.346/0.364 ms
#. From the *controller* node, test access to the management interface on the
*compute* node:
.. code-block:: console
# ping -c 4 compute1
PING compute1 (10.0.0.31) 56(84) bytes of data.
64 bytes from compute1 (10.0.0.31): icmp_seq=1 ttl=64 time=0.263 ms
64 bytes from compute1 (10.0.0.31): icmp_seq=2 ttl=64 time=0.202 ms
64 bytes from compute1 (10.0.0.31): icmp_seq=3 ttl=64 time=0.203 ms
64 bytes from compute1 (10.0.0.31): icmp_seq=4 ttl=64 time=0.202 ms
--- compute1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.202/0.217/0.263/0.030 ms
#. From the *compute* node, test access to the Internet:
.. code-block:: console
# ping -c 4 openstack.org
PING openstack.org (174.143.194.225) 56(84) bytes of data.
64 bytes from 174.143.194.225: icmp_seq=1 ttl=54 time=18.3 ms
64 bytes from 174.143.194.225: icmp_seq=2 ttl=54 time=17.5 ms
64 bytes from 174.143.194.225: icmp_seq=3 ttl=54 time=17.5 ms
64 bytes from 174.143.194.225: icmp_seq=4 ttl=54 time=17.4 ms
--- openstack.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3022ms
rtt min/avg/max/mdev = 17.489/17.715/18.346/0.364 ms
#. From the *compute* node, test access to the management interface on the
*controller* node:
.. code-block:: console
# ping -c 4 controller
PING controller (10.0.0.11) 56(84) bytes of data.
64 bytes from controller (10.0.0.11): icmp_seq=1 ttl=64 time=0.263 ms
64 bytes from controller (10.0.0.11): icmp_seq=2 ttl=64 time=0.202 ms
64 bytes from controller (10.0.0.11): icmp_seq=3 ttl=64 time=0.203 ms
64 bytes from controller (10.0.0.11): icmp_seq=4 ttl=64 time=0.202 ms
--- controller ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.202/0.217/0.263/0.030 ms
.. note::
.. only:: rdo or obs
Your distribution enables a restrictive :term:`firewall` by
default. During the installation process, certain steps will
fail unless you alter or disable the firewall. For more
information about securing your environment, refer to the
`OpenStack Security Guide <http://docs.openstack.org/sec/>`__.
.. only:: ubuntu or debian
Your distribution does not enable a restrictive :term:`firewall`
by default. For more information about securing your environment,
refer to the
`OpenStack Security Guide <http://docs.openstack.org/sec/>`__.