openstack-manuals/doc/ha-guide/source/controller-ha-identity.rst

Highly available Identity API

You should be familiar with OpenStack Identity service before proceeding, which is used by many services.

Making the OpenStack Identity service highly available in active / passive mode involves:

• identity-pacemaker
• identity-config-identity
• identity-services-config

Add OpenStack Identity resource to Pacemaker

SUSE

SUSE Enterprise Linux and SUSE-based distributions, such as openSUSE, use a set of OCF agents for controlling OpenStack services.

1. You must first download the OpenStack Identity resource to Pacemaker by running the following commands:

   # cd /usr/lib/ocf/resource.d
   # mkdir openstack
   # cd openstack
   # wget https://git.openstack.org/cgit/openstack/openstack-resource-agents/plain/ocf/keystone
   # chmod a+rx *

2. You can now add the Pacemaker configuration for the OpenStack Identity resource by running the crm configure command to connect to the Pacemaker cluster. Add the following cluster resources:

   primitive p_keystone ocf:openstack:keystone \
   params config="/etc/keystone/keystone.conf" os_password="secretsecret" os_username="admin" os_tenant_name="admin" os_auth_url="http://10.0.0.11:5000/v2.0/" \
       op monitor interval="30s" timeout="30s"

   This configuration creates p_keystone, a resource for managing the OpenStack Identity service.

   crm configure supports batch input so you may copy and paste the above lines into your live Pacemaker configuration, and then make changes as required. For example, you may enter edit p_ip_keystone from the crm configure menu and edit the resource to match your preferred virtual IP address.

3. After you add these resources, commit your configuration changes by entering commit from the crm configure menu. Pacemaker then starts the OpenStack Identity service and its dependent resources on one of your nodes.

Red Hat

For Red Hat Enterprise Linux and Red Hat-based Linux distributions, the process is simpler as they use the standard Systemd unit files.

# pcs resource create openstack-keystone systemd:openstack-keystone --clone interleave=true

Configure OpenStack Identity service

1. Edit the keystone.conf file to change the values of the bind(2) parameters:

   bind_host = 10.0.0.12
   public_bind_host = 10.0.0.12
   admin_bind_host = 10.0.0.12

   The admin_bind_host parameter lets you use a private network for admin access.

2. To be sure that all data is highly available, ensure that everything is stored in the MySQL database (which is also highly available):

   [catalog]
   driver = keystone.catalog.backends.sql.Catalog
   ...
   [identity]
   driver = keystone.identity.backends.sql.Identity
   ...

Configure OpenStack services to use the highly available OpenStack Identity

Your OpenStack services must now point their OpenStack Identity configuration to the highly available virtual cluster IP address rather than point to the physical IP address of an OpenStack Identity server as you would do in a non-HA environment.

1. For OpenStack Compute, for example, if your OpenStack Identiy service IP address is 10.0.0.11, use the following configuration in your api-paste.ini file:

   auth_host = 10.0.0.11

2. You also need to create the OpenStack Identity Endpoint with this IP address.

   Note

   If you are using both private and public IP addresses, you should create two virtual IP addresses and define your endpoint like this:

   $ openstack endpoint create --region $KEYSTONE_REGION \
     $service-type public http://PUBLIC_VIP:5000/v2.0
   $ openstack endpoint create --region $KEYSTONE_REGION \
     $service-type admin http://10.0.0.11:35357/v2.0
   $ openstack endpoint create --region $KEYSTONE_REGION \
     $service-type internal http://10.0.0.11:5000/v2.0

3. If you are using the horizon dashboard, edit the local_settings.py file to include the following:

   OPENSTACK_HOST = 10.0.0.11