2.2 KiB
Fibre Channel Zone Manager
The Fibre Channel Zone Manager allows FC SAN Zone/Access control management in conjunction with Fibre Channel block storage. The configuration of Fibre Channel Zone Manager and various zone drivers are described in this section.
Configure Block Storage to use Fibre Channel Zone Manager
If Block Storage is configured to use a Fibre Channel volume driver
that supports Zone Manager, update cinder.conf to add the
following configuration options to enable Fibre Channel Zone
Manager.
Make the following changes in the
/etc/cinder/cinder.conf file.
To use different Fibre Channel Zone Drivers, use the parameters described in this section.
Note
When multi backend configuration is used, provide the
zoning_mode configuration option as part of the volume
driver configuration where volume_driver option is
specified.
Note
Default value of zoning_mode is None and
this needs to be changed to fabric to allow fabric
zoning.
Note
zoning_policy can be configured as
initiator-target or initiator
Brocade Fibre Channel Zone Driver
Brocade Fibre Channel Zone Driver performs zoning operations through SSH. Configure Brocade Zone Driver and lookup service by specifying the following parameters:
Configure SAN fabric parameters in the form of fabric groups as described in the example below:
Note
Define a fabric group for each fabric using the fabric names used in
fc_fabric_names configuration option as group name.
System requirements
Brocade Fibre Channel Zone Driver requires firmware version FOS v6.4 or higher.
As a best practice for zone management, use a user account with
zoneadmin role. Users with admin role
(including the default admin user account) are limited to a
maximum of two concurrent SSH sessions.
For information about how to manage Brocade Fibre Channel switches, see the Brocade Fabric OS user documentation.