53 KiB
Administrator's Guide
Managing the Rings
You may build the storage rings on any server with the appropriate version of Swift installed. Once built or changed (rebalanced), you must distribute the rings to all the servers in the cluster. Storage rings contain information about all the Swift storage partitions and how they are distributed between the different nodes and disks.
Swift 1.6.0 is the last version to use a Python pickle format. Subsequent versions use a different serialization format. Rings generated by Swift versions 1.6.0 and earlier may be read by any version, but rings generated after 1.6.0 may only be read by Swift versions greater than 1.6.0. So when upgrading from version 1.6.0 or earlier to a version greater than 1.6.0, either upgrade Swift on your ring building server last after all Swift nodes have been successfully upgraded, or refrain from generating rings until all Swift nodes have been successfully upgraded.
If you need to downgrade from a version of swift greater than 1.6.0 to a version less than or equal to 1.6.0, first downgrade your ring-building server, generate new rings, push them out, then continue with the rest of the downgrade.
For more information see overview_ring.
Removing a device from the ring:
swift-ring-builder <builder-file> remove <ip_address>/<device_name>Removing a server from the ring:
swift-ring-builder <builder-file> remove <ip_address>Adding devices to the ring:
See ring-preparing
See what devices for a server are in the ring:
swift-ring-builder <builder-file> search <ip_address>Once you are done with all changes to the ring, the changes need to be "committed":
swift-ring-builder <builder-file> rebalanceOnce the new rings are built, they should be pushed out to all the servers in the cluster.
Scripting Ring Creation
You can create scripts to create the account and container rings and rebalance. Here's an example script for the Account ring. Use similar commands to create a make-container-ring.sh script on the proxy server node.
Create a script file called make-account-ring.sh on the proxy server node with the following content:
#!/bin/bash cd /etc/swift rm -f account.builder account.ring.gz backups/account.builder backups/account.ring.gz swift-ring-builder account.builder create 18 3 1 swift-ring-builder account.builder add z1-<account-server-1>:6002/sdb1 1 swift-ring-builder account.builder add z2-<account-server-2>:6002/sdb1 1 swift-ring-builder account.builder rebalanceYou need to replace the values of <account-server-1>, <account-server-2>, etc. with the IP addresses of the account servers used in your setup. You can have as many account servers as you need. All account servers are assumed to be listening on port 6002, and have a storage device called "sdb1" (this is a directory name created under /drives when we setup the account server). The "z1", "z2", etc. designate zones, and you can choose whether you put devices in the same or different zones.
Make the script file executable and run it to create the account ring file:
chmod +x make-account-ring.sh sudo ./make-account-ring.shCopy the resulting ring file /etc/swift/account.ring.gz to all the account server nodes in your Swift environment, and put them in the /etc/swift directory on these nodes. Make sure that every time you change the account ring configuration, you copy the resulting ring file to all the account nodes.
Handling System Updates
It is recommended that system updates and reboots are done a zone at a time. This allows the update to happen, and for the Swift cluster to stay available and responsive to requests. It is also advisable when updating a zone, let it run for a while before updating the other zones to make sure the update doesn't have any adverse effects.
Handling Drive Failure
In the event that a drive has failed, the first step is to make sure the drive is unmounted. This will make it easier for swift to work around the failure until it has been resolved. If the drive is going to be replaced immediately, then it is just best to replace the drive, format it, remount it, and let replication fill it up.
If the drive can't be replaced immediately, then it is best to leave it unmounted, and remove the drive from the ring. This will allow all the replicas that were on that drive to be replicated elsewhere until the drive is replaced. Once the drive is replaced, it can be re-added to the ring.
Handling Server Failure
If a server is having hardware issues, it is a good idea to make sure the swift services are not running. This will allow Swift to work around the failure while you troubleshoot.
If the server just needs a reboot, or a small amount of work that should only last a couple of hours, then it is probably best to let Swift work around the failure and get the machine fixed and back online. When the machine comes back online, replication will make sure that anything that is missing during the downtime will get updated.
If the server has more serious issues, then it is probably best to remove all of the server's devices from the ring. Once the server has been repaired and is back online, the server's devices can be added back into the ring. It is important that the devices are reformatted before putting them back into the ring as it is likely to be responsible for a different set of partitions than before.
Detecting Failed Drives
It has been our experience that when a drive is about to fail, error messages will spew into /var/log/kern.log. There is a script called swift-drive-audit that can be run via cron to watch for bad drives. If errors are detected, it will unmount the bad drive, so that Swift can work around it. The script takes a configuration file with the following settings:
[drive-audit]
| Option | Default | Description |
|---|---|---|
| log_facility | LOG_LOCAL0 | Syslog log facility |
| log_level | INFO | Log level |
| device_dir | /srv/node | Directory devices are mounted under |
minutes |
60 |
Number of minutes to look back in /var/log/kern.log |
error_limit |
1 |
Number of errors to find before a device is unmounted |
This script has only been tested on Ubuntu 10.04, so if you are using a different distro or OS, some care should be taken before using in production.
Cluster Health
There is a swift-dispersion-report tool for measuring overall cluster health. This is accomplished by checking if a set of deliberately distributed containers and objects are currently in their proper places within the cluster.
For instance, a common deployment has three replicas of each object. The health of that object can be measured by checking if each replica is in its proper place. If only 2 of the 3 is in place the object's heath can be said to be at 66.66%, where 100% would be perfect.
A single object's health, especially an older object, usually reflects the health of that entire partition the object is in. If we make enough objects on a distinct percentage of the partitions in the cluster, we can get a pretty valid estimate of the overall cluster health. In practice, about 1% partition coverage seems to balance well between accuracy and the amount of time it takes to gather results.
The first thing that needs to be done to provide this health value is create a new account solely for this usage. Next, we need to place the containers and objects throughout the system so that they are on distinct partitions. The swift-dispersion-populate tool does this by making up random container and object names until they fall on distinct partitions. Last, and repeatedly for the life of the cluster, we need to run the swift-dispersion-report tool to check the health of each of these containers and objects.
These tools need direct access to the entire cluster and to the ring files (installing them on a proxy server will probably do). Both swift-dispersion-populate and swift-dispersion-report use the same configuration file, /etc/swift/dispersion.conf. Example conf file:
[dispersion]
auth_url = http://localhost:8080/auth/v1.0
auth_user = test:tester
auth_key = testingThere are also options for the conf file for specifying the dispersion coverage (defaults to 1%), retries, concurrency, etc. though usually the defaults are fine.
Once the configuration is in place, run swift-dispersion-populate to populate the containers and objects throughout the cluster.
Now that those containers and objects are in place, you can run swift-dispersion-report to get a dispersion report, or the overall health of the cluster. Here is an example of a cluster in perfect health:
$ swift-dispersion-report
Queried 2621 containers for dispersion reporting, 19s, 0 retries
100.00% of container copies found (7863 of 7863)
Sample represents 1.00% of the container partition space
Queried 2619 objects for dispersion reporting, 7s, 0 retries
100.00% of object copies found (7857 of 7857)
Sample represents 1.00% of the object partition spaceNow I'll deliberately double the weight of a device in the object ring (with replication turned off) and rerun the dispersion report to show what impact that has:
$ swift-ring-builder object.builder set_weight d0 200
$ swift-ring-builder object.builder rebalance
...
$ swift-dispersion-report
Queried 2621 containers for dispersion reporting, 8s, 0 retries
100.00% of container copies found (7863 of 7863)
Sample represents 1.00% of the container partition space
Queried 2619 objects for dispersion reporting, 7s, 0 retries
There were 1763 partitions missing one copy.
77.56% of object copies found (6094 of 7857)
Sample represents 1.00% of the object partition spaceYou can see the health of the objects in the cluster has gone down significantly. Of course, I only have four devices in this test environment, in a production environment with many many devices the impact of one device change is much less. Next, I'll run the replicators to get everything put back into place and then rerun the dispersion report:
... start object replicators and monitor logs until they're caught up ...
$ swift-dispersion-report
Queried 2621 containers for dispersion reporting, 17s, 0 retries
100.00% of container copies found (7863 of 7863)
Sample represents 1.00% of the container partition space
Queried 2619 objects for dispersion reporting, 7s, 0 retries
100.00% of object copies found (7857 of 7857)
Sample represents 1.00% of the object partition spaceAlternatively, the dispersion report can also be output in json format. This allows it to be more easily consumed by third party utilities:
$ swift-dispersion-report -j
{"object": {"retries:": 0, "missing_two": 0, "copies_found": 7863, "missing_one": 0, "copies_expected": 7863, "pct_found": 100.0, "overlapping": 0, "missing_all": 0}, "container": {"retries:": 0, "missing_two": 0, "copies_found": 12534, "missing_one": 0, "copies_expected": 12534, "pct_found": 100.0, "overlapping": 15, "missing_all": 0}}Cluster Telemetry and Monitoring
Various metrics and telemetry can be obtained from the account, container, and object servers using the recon server middleware and the swift-recon cli. To do so update your account, container, or object servers pipelines to include recon and add the associated filter config.
object-server.conf sample:
[pipeline:main]
pipeline = recon object-server
[filter:recon]
use = egg:swift#recon
recon_cache_path = /var/cache/swiftcontainer-server.conf sample:
[pipeline:main]
pipeline = recon container-server
[filter:recon]
use = egg:swift#recon
recon_cache_path = /var/cache/swiftaccount-server.conf sample:
[pipeline:main]
pipeline = recon account-server
[filter:recon]
use = egg:swift#recon
recon_cache_path = /var/cache/swiftThe recon_cache_path simply sets the directory where stats for a few items will be stored. Depending on the method of deployment you may need to create this directory manually and ensure that swift has read/write access.
Finally, if you also wish to track asynchronous pending on your object servers you will need to setup a cronjob to run the swift-recon-cron script periodically on your object servers:
*/5 * * * * swift /usr/bin/swift-recon-cron /etc/swift/object-server.confOnce the recon middleware is enabled a GET request for "/recon/<metric>" to the server will return a json formatted response:
fhines@ubuntu:~$ curl -i http://localhost:6030/recon/async
HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 20
Date: Tue, 18 Oct 2011 21:03:01 GMT
{"async_pending": 0}The following metrics and telemetry are currently exposed:
| Request URI | Description |
|---|---|
| /recon/load | returns 1,5, and 15 minute load average |
| /recon/mem | returns /proc/meminfo |
| /recon/mounted | returns ALL currently mounted filesystems |
| /recon/unmounted | returns all unmounted drives if mount_check = True |
| /recon/diskusage | returns disk utilization for storage devices |
| /recon/ringmd5 | returns object/container/account ring md5sums |
| /recon/quarantined | returns # of quarantined objects/accounts/containers |
| /recon/sockstat | returns consumable info from /proc/net/sockstat|6 |
| /recon/devices | returns list of devices and devices dir i.e. /srv/node |
| /recon/async | returns count of async pending |
| /recon/replication | returns object replication times (for backward compatability) |
| /recon/replication/<type> | returns replication info for given type (account, container, object) |
| /recon/auditor/<type> | returns auditor stats on last reported scan for given type (account, container, object) |
| /recon/updater/<type> | returns last updater sweep times for given type (container, object) |
This information can also be queried via the swift-recon command line utility:
fhines@ubuntu:~$ swift-recon -h
Usage:
usage: swift-recon <server_type> [-v] [--suppress] [-a] [-r] [-u] [-d]
[-l] [--md5] [--auditor] [--updater] [--expirer] [--sockstat]
<server_type> account|container|object
Defaults to object server.
ex: swift-recon container -l --auditor
Options:
-h, --help show this help message and exit
-v, --verbose Print verbose info
--suppress Suppress most connection related errors
-a, --async Get async stats
-r, --replication Get replication stats
--auditor Get auditor stats
--updater Get updater stats
--expirer Get expirer stats
-u, --unmounted Check cluster for unmounted devices
-d, --diskusage Get disk usage stats
-l, --loadstats Get cluster load average stats
-q, --quarantined Get cluster quarantine stats
--md5 Get md5sum of servers ring and compare to local copy
--sockstat Get cluster socket usage stats
--all Perform all checks. Equal to -arudlq --md5 --sockstat
-z ZONE, --zone=ZONE Only query servers in specified zone
-t SECONDS, --timeout=SECONDS
Time to wait for a response from a server
--swiftdir=SWIFTDIR Default = /etc/swiftFor example, to obtain container replication info from all hosts in zone "3":
fhines@ubuntu:~$ swift-recon container -r --zone 3
===============================================================================
--> Starting reconnaissance on 1 hosts
===============================================================================
[2012-04-02 02:45:48] Checking on replication
[failure] low: 0.000, high: 0.000, avg: 0.000, reported: 1
[success] low: 486.000, high: 486.000, avg: 486.000, reported: 1
[replication_time] low: 20.853, high: 20.853, avg: 20.853, reported: 1
[attempted] low: 243.000, high: 243.000, avg: 243.000, reported: 1Reporting Metrics to StatsD
If you have a StatsD server running, Swift may be configured to send it real-time operational metrics. To enable this, set the following configuration entries (see the sample configuration files):
log_statsd_host = localhost
log_statsd_port = 8125
log_statsd_default_sample_rate = 1
log_statsd_metric_prefix = [empty-string]If log_statsd_host is not set, this feature is disabled. The default values for the other settings are given above.
The sample rate is a real number between 0 and 1 which defines the probability of sending a sample for any given event or timing measurement. This sample rate is sent with each sample to StatsD and used to multiply the value. For example, with a sample rate of 0.5, StatsD will multiply that counter's value by 2 when flushing the metric to an upstream monitoring system (Graphite, Ganglia, etc.). To get the best data, start with the default log_statsd_default_sample_rate value of 1 and only lower it as needed.
The metric prefix will be prepended to every metric sent to the StatsD server For example, with:
log_statsd_metric_prefix = proxy01the metric proxy-server.errors would be sent to StatsD as proxy01.proxy-server.errors. This is useful for differentiating different servers when sending statistics to a central StatsD server. If you run a local StatsD server per node, you could configure a per-node metrics prefix there and leave log_statsd_metric_prefix blank.
Note that metrics reported to StatsD are counters or timing data (which StatsD usually expands out to min, max, avg, count, and 90th percentile per timing metric). Some important "gauge" metrics will still need to be collected using another method. For example, the object-server.async_pendings StatsD metric counts the generation of async_pendings in real-time, but will not tell you the current number of async_pending container updates on disk at any point in time.
Note also that the set of metrics collected, their names, and their semantics are not locked down and will change over time. StatsD logging is currently in a "beta" stage and will continue to evolve.
Metrics for `account-auditor`:
| Metric Name | Description |
|---|---|
account-auditor.errors |
Count of audit runs (across all account databases) which caught an Exception. |
| account-auditor.passes | Count of individual account databases which passed audit. |
| account-auditor.failures | Count of individual account databases which failed audit. |
| account-auditor.timing | Timing data for individual account database audits. |
Metrics for `account-reaper`:
| Metric Name | Description |
|---|---|
| account-reaper.errors | Count of devices failing the mount check. |
| account-reaper.timing | Timing data for each reap_account() call. |
account-reaper.return_codes.X |
Count of HTTP return codes from various operations (eg. object listing, container deletion, etc.). The value for X is the first digit of the return code (2 for 201, 4 for 404, etc.). |
| account-reaper.containers_failures | Count of failures to delete a container. |
| account-reaper.containers_deleted | Count of containers successfully deleted. |
account-reaper.containers_remaining |
Count of containers which failed to delete with zero successes. |
account-reaper.containers_possibly_remaining |
Count of containers which failed to delete with at least one success. |
| account-reaper.objects_failures | Count of failures to delete an object. |
| account-reaper.objects_deleted | Count of objects successfully deleted. |
account-reaper.objects_remaining |
Count of objects which failed to delete with zero successes. |
account-reaper.objects_possibly_remaining |
Count of objects which failed to delete with at least one success. |
Metrics for account-server ("Not Found" is not considered an error and requests which increment errors are not included in the timing data):
| Metric Name | Description |
|---|---|
account-server.DELETE.errors.timing |
Timing data for each DELETE request resulting in an error: bad request, not mounted, missing timestamp. |
account-server.DELETE.timing |
Timing data for each DELETE request not resulting in an error. |
account-server.PUT.errors.timing |
Timing data for each PUT request resulting in an error: bad request, not mounted, conflict, recently-deleted. |
account-server.PUT.timing |
Timing data for each PUT request not resulting in an error. |
account-server.HEAD.errors.timing |
Timing data for each HEAD request resulting in an error: bad request, not mounted. |
account-server.HEAD.timing |
Timing data for each HEAD request not resulting in an error. |
account-server.GET.errors.timing |
Timing data for each GET request resulting in an error: bad request, not mounted, bad delimiter, account listing limit too high, bad accept header. |
account-server.GET.timing |
Timing data for each GET request not resulting in an error. |
account-server.REPLICATE.errors.timing |
Timing data for each REPLICATE request resulting in an error: bad request, not mounted. |
account-server.REPLICATE.timing |
Timing data for each REPLICATE request not resulting in an error. |
account-server.POST.errors.timing |
Timing data for each POST request resulting in an error: bad request, bad or missing timestamp, not mounted. |
account-server.POST.timing |
Timing data for each POST request not resulting in an error. |
Metrics for `account-replicator`:
| Metric Name | Description |
|---|---|
| account-replicator.diffs | Count of syncs handled by sending differing rows. |
account-replicator.diff_caps |
Count of "diffs" operations which failed because "max_diffs" was hit. |
| account-replicator.no_changes | Count of accounts found to be in sync. |
account-replicator.hashmatches |
Count of accounts found to be in sync via hash comparison (broker.merge_syncs was called). |
account-replicator.rsyncs |
Count of completely missing accounts which were sent via rsync. |
account-replicator.remote_merges |
Count of syncs handled by sending entire database via rsync. |
| account-replicator.attempts | Count of database replication attempts. |
account-replicator.failures |
Count of database replication attempts which failed due to corruption (quarantined) or inability to read as well as attempts to individual nodes which failed. |
account-replicator.removes.<device> |
Count of databases on <device> deleted because the delete_timestamp was greater than the put_timestamp and the database had no rows or because it was successfully sync'ed to other locations and doesn't belong here anymore. |
account-replicator.successes |
Count of replication attempts to an individual node which were successful. |
account-replicator.timing |
Timing data for each database replication attempt not resulting in a failure. |
Metrics for `container-auditor`:
| Metric Name | Description |
|---|---|
container-auditor.errors |
Incremented when an Exception is caught in an audit pass (only once per pass, max). |
| container-auditor.passes | Count of individual containers passing an audit. |
| container-auditor.failures | Count of individual containers failing an audit. |
| container-auditor.timing | Timing data for each container audit. |
Metrics for `container-replicator`:
| Metric Name | Description |
|---|---|
| container-replicator.diffs | Count of syncs handled by sending differing rows. |
container-replicator.diff_caps |
Count of "diffs" operations which failed because "max_diffs" was hit. |
| container-replicator.no_changes | Count of containers found to be in sync. |
container-replicator.hashmatches |
Count of containers found to be in sync via hash comparison (broker.merge_syncs was called). |
container-replicator.rsyncs |
Count of completely missing containers where were sent via rsync. |
container-replicator.remote_merges |
Count of syncs handled by sending entire database via rsync. |
| container-replicator.attempts | Count of database replication attempts. |
container-replicator.failures |
Count of database replication attempts which failed due to corruption (quarantined) or inability to read as well as attempts to individual nodes which failed. |
container-replicator.removes.<device> |
Count of databases deleted on <device> because the delete_timestamp was greater than the put_timestamp and the database had no rows or because it was successfully sync'ed to other locations and doesn't belong here anymore. |
container-replicator.successes |
Count of replication attempts to an individual node which were successful. |
container-replicator.timing |
Timing data for each database replication attempt not resulting in a failure. |
Metrics for container-server ("Not Found" is not considered an error and requests which increment errors are not included in the timing data):
| Metric Name | Description |
|---|---|
container-server.DELETE.errors.timing |
Timing data for DELETE request errors: bad request, not mounted, missing timestamp, conflict. |
container-server.DELETE.timing |
Timing data for each DELETE request not resulting in an error. |
container-server.PUT.errors.timing |
Timing data for PUT request errors: bad request, missing timestamp, not mounted, conflict. |
container-server.PUT.timing |
Timing data for each PUT request not resulting in an error. |
container-server.HEAD.errors.timing |
Timing data for HEAD request errors: bad request, not mounted. |
container-server.HEAD.timing |
Timing data for each HEAD request not resulting in an error. |
container-server.GET.errors.timing |
Timing data for GET request errors: bad request, not mounted, parameters not utf8, bad accept header. |
container-server.GET.timing |
Timing data for each GET request not resulting in an error. |
container-server.REPLICATE.errors.timing |
Timing data for REPLICATE request errors: bad request, not mounted. |
container-server.REPLICATE.timing |
Timing data for each REPLICATE request not resulting in an error. |
container-server.POST.errors.timing |
Timing data for POST request errors: bad request, bad x-container-sync-to, not mounted. |
container-server.POST.timing |
Timing data for each POST request not resulting in an error. |
Metrics for `container-sync`:
| Metric Name | Description |
|---|---|
container-sync.skips |
Count of containers skipped because they don't have sync'ing enabled. |
| container-sync.failures | Count of failures sync'ing of individual containers. |
| container-sync.syncs | Count of individual containers sync'ed successfully. |
container-sync.deletes |
Count of container database rows sync'ed by deletion. |
container-sync.deletes.timing |
Timing data for each container database row sychronization via deletion. |
| container-sync.puts | Count of container database rows sync'ed by PUTing. |
container-sync.puts.timing |
Timing data for each container database row synchronization via PUTing. |
Metrics for `container-updater`:
| Metric Name | Description |
|---|---|
container-updater.successes |
Count of containers which successfully updated their account. |
container-updater.failures |
Count of containers which failed to update their account. |
container-updater.no_changes |
Count of containers which didn't need to update their account. |
container-updater.timing |
Timing data for processing a container; only includes timing for containers which needed to update their accounts (i.e. "successes" and "failures" but not "no_changes"). |
Metrics for `object-auditor`:
| Metric Name | Description |
|---|---|
| object-auditor.quarantines | Count of objects failing audit and quarantined. |
| object-auditor.errors | Count of errors encountered while auditing objects. |
object-auditor.timing |
Timing data for each object audit (does not include any rate-limiting sleep time for max_files_per_second, but does include rate-limiting sleep time for max_bytes_per_second). |
Metrics for `object-expirer`:
| Metric Name | Description |
|---|---|
| object-expirer.objects | Count of objects expired. |
object-expirer.errors |
Count of errors encountered while attempting to expire an object. |
object-expirer.timing |
Timing data for each object expiration attempt, including ones resulting in an error. |
Metrics for `object-replicator`:
| Metric Name | Description |
|---|---|
object-replicator.partition.delete.count.<device> |
A count of partitions on <device> which were replicated to another node because they didn't belong on this node. This metric is tracked per-device to allow for "quiescence detection" for object replication activity on each device. |
object-replicator.partition.delete.timing |
Timing data for partitions replicated to another node because they didn't belong on this node. This metric is not tracked per device. |
object-replicator.partition.update.count.<device> |
A count of partitions on <device> which were replicated to another node, but also belong on this node. As with delete.count, this metric is tracked per-device. |
object-replicator.partition.update.timing |
Timing data for partitions replicated which also belong on this node. This metric is not tracked per-device. |
object-replicator.suffix.hashes |
Count of suffix directories whose hash (of filenames) was recalculated. |
| object-replicator.suffix.syncs | Count of suffix directories replicated with rsync. |
Metrics for `object-server`:
| Metric Name | Description |
|---|---|
object-server.quarantines |
Count of objects (files) found bad and moved to quarantine. |
object-server.async_pendings |
Count of container updates saved as async_pendings (may result from PUT or DELETE requests). |
object-server.POST.errors.timing |
Timing data for POST request errors: bad request, missing timestamp, delete-at in past, not mounted. |
object-server.POST.timing |
Timing data for each POST request not resulting in an error. |
object-server.PUT.errors.timing |
Timing data for PUT request errors: bad request, not mounted, missing timestamp, object creation constraint violation, delete-at in past. |
| object-server.PUT.timeouts | Count of object PUTs which exceeded max_upload_time. |
object-server.PUT.timing |
Timing data for each PUT request not resulting in an error. |
object-server.GET.errors.timing |
Timing data for GET request errors: bad request, not mounted, header timestamps before the epoch, precondition failed. File errors resulting in a quarantine are not counted here. |
object-server.GET.timing |
Timing data for each GET request not resulting in an error. Includes requests which couldn't find the object (including disk errors resulting in file quarantine). |
object-server.HEAD.errors.timing |
Timing data for HEAD request errors: bad request, not mounted. |
object-server.HEAD.timing |
Timing data for each HEAD request not resulting in an error. Includes requests which couldn't find the object (including disk errors resulting in file quarantine). |
object-server.DELETE.errors.timing |
Timing data for DELETE request errors: bad request, missing timestamp, not mounted, precondition failed. Includes requests which couldn't find or match the object. |
object-server.DELETE.timing |
Timing data for each DELETE request not resulting in an error. |
object-server.REPLICATE.errors.timing |
Timing data for REPLICATE request errors: bad request, not mounted. |
object-server.REPLICATE.timing |
Timing data for each REPLICATE request not resulting in an error. |
Metrics for `object-updater`:
| Metric Name | Description |
|---|---|
object-updater.errors |
Count of drives not mounted or async_pending files with an unexpected name. |
object-updater.timing |
Timing data for object sweeps to flush async_pending container updates. Does not include object sweeps which did not find an existing async_pending storage directory. |
object-updater.quarantines |
Count of async_pending container updates which were corrupted and moved to quarantine. |
| object-updater.successes | Count of successful container updates. |
| object-updater.failures | Count of failed container updates. |
object-updater.unlinks |
Count of async_pending files unlinked. An async_pending file is unlinked either when it is successfully processed or when the replicator sees that there is a newer async_pending file for the same object. |
Metrics for proxy-server (in the table, <type> is the proxy-server controller responsible for the request and will be one of "account", "container", or "object"):
| Metric Name | Description |
|---|---|
proxy-server.errors |
Count of errors encountered while serving requests before the controller type is determined. Includes invalid Content-Length, errors finding the internal controller to handle the request, invalid utf8, and bad URLs. |
proxy-server.<type>.handoff_count |
Count of node hand-offs; only tracked if log_handoffs is set in the proxy-server config. |
proxy-server.<type>.handoff_all_count |
Count of times only hand-off locations were utilized; only tracked if log_handoffs is set in the proxy-server config. |
proxy-server.<type>.client_timeouts |
Count of client timeouts (client did not read within client_timeout seconds during a GET or did not supply data within client_timeout seconds during a PUT). |
proxy-server.<type>.client_disconnects |
Count of detected client disconnects during PUT operations (does NOT include caught Exceptions in the proxy-server which caused a client disconnect). |
Metrics for proxy-logging middleware (in the table, <type> is either the proxy-server controller responsible for the request: "account", "container", "object", or the string "SOS" if the request came from the Swift Origin Server middleware. The <verb> portion will be one of "GET", "HEAD", "POST", "PUT", "DELETE", "COPY", "OPTIONS", or "BAD_METHOD". The list of valid HTTP methods is configurable via the log_statsd_valid_http_methods config variable and the default setting yields the above behavior.
| Metric Name | Description |
|---|---|
proxy-server.<type>.<verb>.<status>.timing |
Timing data for requests. The <status> portion is the numeric HTTP status code for the request (eg. "200" or "404") |
proxy-server.<type>.<verb>.<status>.xfer |
The count of the sum of bytes transferred in (from clients) and out (to clients) for requests. The <type>, <verb>, and <status> portions of the metric are just like the timing metric. |
Metrics for tempauth middleware (in the table, <reseller_prefix> represents the actual configured reseller_prefix or "NONE" if the reseller_prefix is the empty string):
| Metric Name | Description |
|---|---|
tempauth.<reseller_prefix>.unauthorized |
Count of regular requests which were denied with HTTPUnauthorized. |
tempauth.<reseller_prefix>.forbidden |
Count of regular requests which were denied with HTTPForbidden. |
| tempauth.<reseller_prefix>.token_denied | Count of token requests which were denied. |
| tempauth.<reseller_prefix>.errors | Count of errors. |
Debugging Tips and Tools
When a request is made to Swift, it is given a unique transaction id. This id should be in every log line that has to do with that request. This can be useful when looking at all the services that are hit by a single request.
If you need to know where a specific account, container or object is in the cluster, swift-get-nodes will show the location where each replica should be.
If you are looking at an object on the server and need more info, swift-object-info will display the account, container, replica locations and metadata of the object.
If you want to audit the data for an account, swift-account-audit can be used to crawl the account, checking that all containers and objects can be found.
Managing Services
Swift services are generally managed with swift-init. the general usage is
swift-init <service> <command>, where service
is the swift service to manage (for example object, container, account,
proxy) and command is one of:
| Command | Description |
|---|---|
| start | Start the service |
| stop | Stop the service |
| restart | Restart the service |
| shutdown | Attempt to gracefully shutdown the service |
| reload | Attempt to gracefully restart the service |
A graceful shutdown or reload will finish any current requests before completely stopping the old service. There is also a special case of swift-init all <command>, which will run the command for all swift services.
Object Auditor
On system failures, the XFS file system can sometimes truncate files it's trying to write and produce zero-byte files. The object-auditor will catch these problems but in the case of a system crash it would be advisable to run an extra, less rate limited sweep to check for these specific files. You can run this command as follows: swift-object-auditor /path/to/object-server/config/file.conf once -z 1000 "-z" means to only check for zero-byte files at 1000 files per second.
Object Replicator
At times it is useful to be able to run the object replicator on a specific device or partition. You can run the object-replicator as follows: swift-object-replicator /path/to/object-server/config/file.conf once --devices=sda,sdb
This will run the object replicator on only the sda and sdb devices. You can likewise run that command with --partitions. Both params accept a comma separated list of values. If both are specified they will be ANDed together. These can only be run in "once" mode.
Swift Orphans
Swift Orphans are processes left over after a reload of a Swift server.
For example, when upgrading a proxy server you would probaby finish with a swift-init proxy-server reload or /etc/init.d/swift-proxy reload. This kills the parent proxy server process and leaves the child processes running to finish processing whatever requests they might be handling at the time. It then starts up a new parent proxy server process and its children to handle new incoming requests. This allows zero-downtime upgrades with no impact to existing requests.
The orphaned child processes may take a while to exit, depending on the length of the requests they were handling. However, sometimes an old process can be hung up due to some bug or hardware issue. In these cases, these orphaned processes will hang around forever. swift-orphans can be used to find and kill these orphans.
swift-orphans with no arguments will just list the orphans it finds that were started more than 24 hours ago. You shouldn't really check for orphans until 24 hours after you perform a reload, as some requests can take a long time to process. swift-orphans -k TERM will send the SIG_TERM signal to the orphans processes, or you can kill -TERM the pids yourself if you prefer.
You can run swift-orphans --help for more options.
Swift Oldies
Swift Oldies are processes that have just been around for a long time. There's nothing necessarily wrong with this, but it might indicate a hung process if you regularly upgrade and reload/restart services. You might have so many servers that you don't notice when a reload/restart fails; swift-oldies can help with this.
For example, if you upgraded and reloaded/restarted everything 2 days ago, and you've already cleaned up any orphans with swift-orphans, you can run swift-oldies -a 48 to find any Swift processes still around that were started more than 2 days ago and then investigate them accordingly.
Custom Log Handlers
Swift supports setting up custom log handlers for services by specifying a comma-separated list of functions to invoke when logging is setup. It does so via the log_custom_handlers configuration option. Logger hooks invoked are passed the same arguments as Swift's get_logger function (as well as the getLogger and LogAdapter object):
| Name | Description |
|---|---|
| conf | Configuration dict to read settings from |
| name | Name of the logger received |
| log_to_console | (optional) Write log messages to console on stderr |
| log_route | Route for the logging received |
| fmt | Override log format received |
| logger | The logging.getLogger object |
| adapted_logger | The LogAdapter object |
A basic example that sets up a custom logger might look like the following:
def my_logger(conf, name, log_to_console, log_route, fmt, logger,
adapted_logger):
my_conf_opt = conf.get('some_custom_setting')
my_handler = third_party_logstore_handler(my_conf_opt)
logger.addHandler(my_handler)See custom-logger-hooks-label for sample use cases.