Yasufumi Ogawa af542c4418 Remove sphinxcontrib-*diag

As suggested open openstack-discuss ML[1], some sphinxcontrib packages
have not been updated for several years and might going to be
maintained anymore. In tacker-specs repo, many diagrams are compiled
with sphinxcontrib-seqdiag and sphinxcontrib-nwdiag. This update is to
drop using the packages and add image files instead. The embedded
source codes are remained as separated files and named as "*.diag".

In addition, it includes two updates other than that.

* usage of the dropped diagram support described in the
  `specs/template.rst` is also removed because it's no longer
  supported.

* Upgrade the version of `pillow` to the latest 11.0.0 since
  installation is failed if the version is old.

[1] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack.org/message/4IID4UEXY4PJJGBTMFMTRYLKJIN4GOQ6/

Change-Id: I8cede6de0770b68a9984617643aa4aa81e47ba5c

2024-12-04 09:01:41 +00:00

43 KiB

Raw Permalink Blame History

Support Thresholds resource in PM Interface

https://blueprints.launchpad.net/tacker/+spec/support-auto-lcm

Problem description

This specification provides implementations of "Thresholds" resource for supporting Performance Management interface with external monitoring tools such as Prometheus¹. Tacker Zed release has supported ETSI NFV-SOL 002 v3.3.1² and ETSI NFV-SOL 003 v3.3.1³ based Fault Management and Performance Management interfaces, however, Thresholds resource is not implemented for the Performance Management interface in Tacker. Tacker needs to support Thresholds resource for advancing ETSI NFV standard compliance and functionality.

Table: Operations of Performance Management interface and Tacker support status

Operations of PM interface	Supported in (Zed)	Supported in (Antelope)
Create a PM Job	Yes	Yes
Query PM Jobs	Yes	Yes
Read a single PM job	Yes	Yes
Update PM job callback	Yes	Yes
Delete a PM Job	Yes	Yes
Read an individual performance report	Yes	Yes
Create a threshold	No	Yes
Query thresholds	No	Yes
Read a single threshold	No	Yes
Update threshold callback	No	Yes
Delete a threshold	No	Yes
Notify about PM related events	Performance information availability only	Both performance information availability and threshold crossing
Test the notification endpoint	PM jobs only	Both PM jobs and thresholds

Proposed change

The following changes are needed:

Add support Thresholds resource for Performance Management interface specified in SOL002/003.
- Add Thresholds resource in VNF Performance Management interface:
  - Create and Update a threshold
    - POST /vnfpm/v2/thresholds to create a threshold.
    - PATCH /vnfpm/v2/thresholds/{thresholdId} to update the specified threshold callback.
  - Get threshold(s)
    - GET /vnfpm/v2/thresholds to get all thresholds.
    - GET /vnfpm/v2/thresholds/{thresholdId} to get the specified threshold.
  - Delete a threshold
    - DELETE /vnfpm/v2/thresholds/{thresholdId} to delete the specified threshold.
- Enhance notification to Client:
  - POST <Client URI for notifications> to notify Client that Tacker received a PM threshold related event.
  - GET <Client URI from subscriptions> to confirm that the URI of Client is correct.
Add support of RESTful API for communications between Tacker and External Monitoring Tool
- POST /pm_threshold to receive the PM threshold event sent from External Monitoring Tool.
Create a new DB table for PM Thresholds.

Note

The External Monitoring Tool is a monitoring service. That is not included in Tacker. Operators implement the External Monitoring Tool. The External Monitoring Tool uses metrics service such as Prometheus and notifies PM events using the Prometheus Plugin interface⁴.

AutoScale on PM threshold event trigger

Tacker has a configuration value in metadata that indicates uri of alert manager. Prometheus Plugin converts from PM threshold schema to prometheus schema when a PM threshold has been created.

When the External Monitoring Tool detects that the CNF have some PM threshold events, it will send event messages to Tacker. After Tacker receives the event, it will convert the event to store it in the DB.

Design of scale operation in PM Threshold

The following is a schematic diagram of scale:

+------------------------+
|                        |       9. Send threshold notification
|   Client (NFVO/EM)     <-------------------+
|                        |                   |
+--+---------+-----------+                   |
   |         | 1. Create threshold           |
10. Scale  |         |                               |
+------|---------|-------------------------------|----------------------------+
|      |         |                               |                       VNFM |
|  +---|---------|---------+ +-------------------|-------------+              |
|  |   |         |  Tacker | |                   |  Tacker     |              |
|  |   |         |  Server | |                   |  Conductor  |              |
|  |   | +-------v------+  | |                   |             |   +--------+ |
|  |   | | VnfPm        +------------------------+-----------------> Tacker | |
|  |   | | ControllerV2 |  | |         +---------+----+        |   | DB     | |
+----------------+          |  |   | +---------+----+  | |  +------> VnfPm        +------------>        | |
|  External      |          |  |   | 2. Set    |       | |  |      | DriverV2     |        |   +--------+ |
|  Monitoring    | 5. POST  |  |   | threshold |       | |  |      +--------------+        |              |
|  Tool          |    event |  |   |   +-------v----+  | |  |    8. Create threshold       |              |
|  (based on     +---------------------> Prometheus +-------+       notification           |              |
|   Prometheus)  <---------------------+ Plugin     |  | |                                 |              |
|                | 6. Get related data +------------+  | |                                 |              |
|                |          |  |   |    7.Evaluate     | |                                 |              |
+--+-------------+ 3. Set   |  |   |      threshold    | |                                 |              |
^              threshold |  |   |      crossing     | |                                 |              |
| 4. Trigger event       |  |   |   +------------+  | |         +--------------+        |              |
|                        |  |   +---> Vnflcm     +--------------> VmfLcmDriver +---+    |              |
|                        |  |       | Controller |  | |         +--------------+   |    |              |
|                        |  |       +------------+  | |                  +---------v--+ |              |
|                        |  |                       | |                  | Infra      | |              |
|                        |  |                       | |                  | Driver     | |              |
|                        |  |                       | |                  +----+-------+ |              |
|                        |  +-----------------------+ +-----------------------|---------+              |
|                        +----------------------------------------------------|------------------------+
|                                                                             |
|                        +----------------------------------------------------|------------+
|                        |  CISM/CIS                                          |            |
|                        |                  +---------------+-----------------+            |
|                        |                  |               | 11. Create or Delete         |
|                        |                  |               |     CNF                      |
|                        |         +--------v----+   +------v------+    +-------------+    |
|                        |         | +--------+  |   | +--------+  |    |             |    |
+----------------------------------> | CNF    |  |   | | CNF    |  |    |             |    |
|         | +--------+  |   | +--------+  |    |             |    |
|         |      Worker |   |      Worker |    |      Master |    |
|         +-------------+   +-------------+    +-------------+    |
+-----------------------------------------------------------------+

The Client sends a request to the Tacker to create a threshold.
VnfPmControllerV2 sends threshold information to Prometheus Plugin.
Prometheus Plugin sets a threshold to External Monitoring Tool.
External Monitoring Tool collects metrics and triggers events.
External Monitoring Tool sends POST request to Tacker with specified URI.
Tacker collects data related to the PM event. From the data obtained in 4-5, The value and context corresponding to threshold crossing are determined. Prometheus Plugin also update the corresponding resource from the DB.
Prometheus Plugin evaluates the event. If there is a threshold crossing condition that can match successfully, the event is sent to the specified path of the Client. If the evaluation is not successful, the processing ends.
VnfPmDriverV2 creates a threshold notification and save threshold information to the DB.
VnfPmDriverV2 sends a threshold notification to the Client.
The Client makes a request for the context of the notification, then make a decision of scaling.
Scale operation is triggered, new CNF is created in case of scale-out or old CNF is deleted in case of scale-in.

Request parameters for operation in PM Threshold

The detail of API is described at REST API impact.

Sequence for operation in PM threshold

The following sequence diagrams describes the Client's processing flow for Tacker to AutoScale by PM threshold.

The Client sends a request to create a threshold to the Tacker. After Tacker receives the threshold, it will get the callback_uri in it. In order to verify the correctness of the callback_uri, the Tacker sends a request to the callback_uri address of the Client. After getting the normal response HTTP 204 No Content from the Client, the Tacker saves the subscription to the DB.
Tacker sends a threshold to Prometheus Plugin. Prometheus Plugin converts it into Prometheus format, then sends it to External Monitoring Tool. Tacker saves a threshold to the DB and responses HTTP 201 Created to the Client.
External Monitoring Tool receives event sent from Prometheus and inform the event to specified URI (Tacker).
Prometheus Plugin obtains values from cfg.CONF.tacker.prometheus_plugin to determine whether to enable this function. Prometheus Plugin judges what processing to perform according to the function_type field of the labels in the event. When the labels.function_type is vnfpm, AutoScale is performed.
Prometheus Plugin finds the corresponding resource information according to the value of the node label in the event.
Prometheus Plugin evaluates a threshold crossing condition, if it does not match, the processing ends.
Prometheus Plugin executes VnfPmDriverV2.
VnfPmDriverV2 sends a Notify Threshold event request to the Client's callback_uri address. After the Client receives the request and processes it, it returns HTTP 204 No Content by default.
The Client obtains the VNFC information from the notification.
The Client sends a request to the Tacker to scale the VNFC.
From this step, it is completely the same with the default scale operation.

Alternatives

None

Data model impact

Add below new db table in 'Tacker' database.

Table: ThresholdV2

Name	Type	Constraint
id	varchar(255)	Pri
objectType	varchar(32)	NOT NULL
objectInstanceId	varchar(255)	NOT NULL
subObjectInstanceIds	JSON	NULL
criteria	JSON	NOT NULL
callbackUri	varchar(255)	NOT NULL
authentication	JSON	NULL
metadata	JSON	NOT NULL

This table have id as primary key.

REST API impact

The following RESTful APIs are in compliance with SOL002/003⁵ ⁶ 6.VNF Performance Management interface.

Name: Create a threshold
Description: Create a threshold. Thresholds group details of performance information
Method type: POST
URL for the resource: /vnfpm/v2/thresholds
Request:

Data type	Cardinality	Description
CreateThresholdRequest	1	Threshold creation request

Attribute name (CreateThresholdRequest)	Data type	Cardinality	Description
objectType	String	1	Type of the measured object. The applicable measured object type for a measurement is defined in clause 7.2 of ETSI GS NFV-IFA 027⁷.
objectInstanceId	Identifier	1	Identifiers of the measured object instances associated with this threshold.
subObjectInstanceIds	IdentifierInVnf	0..N	Identifiers of the measured object instances in case of a structured measured object.
criteria	ThresholdCriteria	1	Criteria that define this threshold.
>performanceMetric	String	1	This defines the types of performance metrics associated with the threshold. Valid values are specified as "Measurement Name" values in clause 7.2 of ETSI GS NFV-IFA 027⁸.
>thresholdType	Enum	1	Type of threshold. This attribute determines which other attributes are present in the data structure. In ETSI NFV-SOL 002 v3.3.1⁹ and ETSI NFV-SOL 003 v3.3.1¹⁰, "SIMPLE: Single-valued static threshold" is permitted.
>simpleThresholdDetails	Structure	0..1	Details of a simple threshold. Shall be present if thresholdType="SIMPLE".
>>thresholdValue	Number	1	The threshold value. Shall be represented as a floating point number.
>>hysteresis	Number	1	The hysteresis of the threshold. Shall be represented as a non-negative floating point number.
callbackUri	Uri	1	The URI of the endpoint to send the notification to.
authentication	SubscriptionAuthentication	0..1	Authentication parameters to configure the use of Authorization when sending notifications corresponding to this subscription. See as clause 8.3.4 of ETSI GS NFV-SOL 013¹¹
metadata	Structure	1	Additional parameters to create a threshold. (Tacker original attribute)
>monitoring	Structure	1	Treats to specify such as monitoring system and driver information.
>>monitorName	String	1	In case specifying "prometheus", backend of monitoring feature is to be Prometheus.
>>driverType	String	1	"external": SCP/SFTP for config file transfer.
>>targetsInfo	Structure	1..N	Information about the target monitoring system.
>>>prometheusHost	String	1	FQDN or ip address of target PrometheusServer.
>>>prometheusHostPort	Int	1	Port of the ssh target PrometheusServer.
>>>alertRuleConfigPath	String	1	Path of alertRuleConfig path for target Prometheus.
>>>prometheusReloadApiEndpoint	String	1	Endpoint url of reload API of target Prometheus.
>>>authInfo	Structure	1	Define authentication information to access host.
>>>>ssh_username	String	1	The username of the target host for ssh.
>>>>ssh_password	String	1	The password of the target host for ssh.

Response:

Data type	Cardinality	Response Codes	Description
Threshold	1	Success: 201	Shall be returned when a threshold has been created successfully.
ProblemDetails	1	Error: 422	The content type of the payload body is supported and the payload body of a request contains syntactically correct data but the data cannot be processed.
ProblemDetails	See clause 6.4 of¹²	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013¹³ may be returned.

Attribute name (Threshold)	Data type	Cardinality	Description
id	Identifier	1	Identifier of this threshold.
objectType	String	1	Type of the measured object. The applicable measured object type for a measurement is defined in clause 7.2 of ETSI GS NFV-IFA 027¹⁴.
objectInstanceId	Identifier	1	Identifiers of the measured object instances associated with this threshold.
subObjectInstanceIds	IdentifierInVnf	0..N	Identifiers of the measured object instances in case of a structured measured object.
criteria	ThresholdCriteria	1	Criteria that define this threshold.
>performanceMetric	String	1	This defines the types of performance metrics associated with the threshold. Valid values are specified as "Measurement Name" values in clause 7.2 of ETSI GS NFV-IFA 027¹⁵.
>thresholdType	Enum	1	Type of threshold. This attribute determines which other attributes are present in the data structure. In ETSI NFV-SOL 002 v3.3.1¹⁶ and ETSI NFV-SOL 003 v3.3.1¹⁷, "SIMPLE: Single-valued static threshold" is permitted.
>simpleThresholdDetails	Structure	0..1	Details of a simple threshold. Shall be present if thresholdType="SIMPLE".
>>thresholdValue	Number	1	The threshold value. Shall be represented as a floating point number.
>>hysteresis	Number	1	The hysteresis of the threshold. Shall be represented as a non-negative floating point number.
callbackUri	Uri	1	The URI of the endpoint to send the notification to.
_links	Structure	1	Links for this resource.
>self	Link	1	URI of this resource.
>object	Link	0..1	Links to resources representing the measured object instances for which performance information is collected. Shall be present if the measured object instance information is accessible as a resource.

Note

When processing a request to create a threshold, it should enforce a suitable minimum value for this attribute by override the value or reject the request.

Note

"Hysteresis" is implemented based on thresholdType, "Single-valued static threshold." A notification with crossing direction "UP" will be generated if the measured value reaches or exceeds "thresholdValue" + "hysteresis". A notification with crossing direction "DOWN" will be generated if the measured value reaches or undercuts "thresholdValue" - "hysteresis". These methods need to store the previous value in Tacker DB to detect the crossing direction.

Name: Query thresholds
Description: Allow users to filter out thresholds based on query parameter in the request
Method type: GET
URL for the resource: /vnfpm/v2/thresholds
Query parameters:

Name Cardinality Description

Name	Cardinality	Description
filter	0..1	Attribute-based filtering expression. according to clause 5.2 of ETSI GS NFV-SOL 013¹⁸. For example, below URI query parameter will matching threshold with objectType=VNFC. `GET /vnfpm/v2/thresholds?filter=(eq,objectType,VNFC)`
nextpage_opaque_marker	0..1	Marker to obtain the next page of a paged response. according to clause 5.4 of ETSI GS NFV-SOL 013¹⁹.

filter

0..1

Attribute-based filtering expression. according to clause 5.2 of ETSI GS NFV-SOL 013¹⁸.

For example, below URI query parameter will matching threshold with objectType=VNFC.

GET /vnfpm/v2/thresholds?filter=(eq,objectType,VNFC)

nextpage_opaque_marker 0..1 Marker to obtain the next page of a paged response. according to clause 5.4 of ETSI GS NFV-SOL 013¹⁹.

Request:

Data type	Cardinality	Description
n/a

Response:

Data type	Cardinality	Response Codes	Description
Threshold	0..N	Success: 200	Shall be returned when information about zero or more thresholds has been queried successfully.
ProblemDetails	1	Error: 400	Invalid attribute-based filtering expression. The response body shall contain a ProblemDetails structure, in which the "detail" attribute should convey more information about the error.
ProblemDetails	1	Error: 400	Response too big.
ProblemDetails	See clause 6.4 of²⁰	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013²¹ may be returned.

Attribute name (Threshold)	Data type	Cardinality	Description
id	Identifier	1	Identifier of this threshold.
objectType	String	1	Type of the measured object. The applicable measured object type for a measurement is defined in clause 7.2 of ETSI GS NFV-IFA 027²².
objectInstanceId	Identifier	1	Identifiers of the measured object instances associated with this threshold.
subObjectInstanceIds	IdentifierInVnf	0..N	Identifiers of the measured object instances in case of a structured measured object.
criteria	ThresholdCriteria	1	Criteria that define this threshold.
>performanceMetric	String	1	This defines the types of performance metrics associated with the threshold. Valid values are specified as "Measurement Name" values in clause 7.2 of ETSI GS NFV-IFA 027²³.
>thresholdType	Enum	1	Type of threshold. This attribute determines which other attributes are present in the data structure. In ETSI NFV-SOL 002 v3.3.1²⁴ and ETSI NFV-SOL 003 v3.3.1²⁵, "SIMPLE: Single-valued static threshold" is permitted.
>simpleThresholdDetails	Structure	0..1	Details of a simple threshold. Shall be present if thresholdType="SIMPLE".
>>thresholdValue	Number	1	The threshold value. Shall be represented as a floating point number.
>>hysteresis	Number	1	The hysteresis of the threshold. Shall be represented as a non-negative floating point number.
callbackUri	Uri	1	The URI of the endpoint to send the notification to.
_links	Structure	1	Links for this resource.
>self	Link	1	URI of this resource.
>object	Link	0..1	Links to resources representing the measured object instances for which performance information is collected. Shall be present if the measured object instance information is accessible as a resource.

Name: Read a single threshold
Description: Get a individual threshold
Method type: GET
URL for the resource: /vnfpm/v2/thresholds/{thresholdId}
Path parameters:

Name	Cardinality	Description
thresholdId	1	Threshold ID.

Request:

Data type	Cardinality	Description
n/a

Response:

Data type	Cardinality	Response Codes	Description
Threshold	1	Success: 200	Shall be returned when information about an individual threshold has been read successfully.
ProblemDetails	See clause 6.4 of²⁶	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013²⁷ may be returned.

Attribute name (Threshold)	Data type	Cardinality	Description
id	Identifier	1	Identifier of this threshold.
objectType	String	1	Type of the measured object. The applicable measured object type for a measurement is defined in clause 7.2 of ETSI GS NFV-IFA 027²⁸.
objectInstanceId	Identifier	1	Identifiers of the measured object instances for which performance information is collected.
subObjectInstanceIds	IdentifierInVnf	0..N	Identifiers of the measured object instances in case of a structured measured object.
criteria	ThresholdCriteria	1	Criteria that define this threshold.
>performanceMetric	String	1	This defines the types of performance metrics associated with the threshold. Valid values are specified as "Measurement Name" values in clause 7.2 of ETSI GS NFV-IFA 027²⁹.
>thresholdType	Enum	1	Type of threshold. This attribute determines which other attributes are present in the data structure. In ETSI NFV-SOL 002 v3.3.1³⁰ and ETSI NFV-SOL 003 v3.3.1³¹, "SIMPLE: Single-valued static threshold" is permitted.
>simpleThresholdDetails	Structure	0..1	Details of a simple threshold. Shall be present if thresholdType="SIMPLE".
>>thresholdValue	Number	1	The threshold value. Shall be represented as a floating point number.
>>hysteresis	Number	1	The hysteresis of the threshold. Shall be represented as a non-negative floating point number.
callbackUri	Uri	1	The URI of the endpoint to send the notification to.
_links	Structure	1	Links for this resource.
>self	Link	1	URI of this resource.
>object	Link	0..1	Links to resources representing the measured object instances for which performance information is collected. Shall be present if the measured object instance information is accessible as a resource.

Name: Update threshold callback
Description: Modify resource of an individual threshold
Method type: PATCH
URL for the resource: /vnfpm/v2/thresholds/{thresholdId}
Content-Type: application/mergepatch+json
Path parameters:

Name	Cardinality	Description
thresholdId	1	Threshold ID.

Request:

Data type	Cardinality	Description
ThresholdModifications	1	Parameters for the threshold modification.

Attribute name (ThresholdModifications)	Data type	Cardinality	Description
callbackUri	Uri	0..1	New value of the "callbackUri" attribute. The value "null" is not permitted.
authentication	SubscriptionAuthentication	0..1	New value of the "authentication" attribute, or "null" to remove the attribute. If present in a request body, these modifications shall be applied according to the rules of JSON Merge Patch.

Response:

Data type	Cardinality	Response Codes	Description
ThresholdModifications	1	Success: 200	Shall be returned when the request has been processed successfully.
ProblemDetails	1	422	The content type of the payload body is supported and the payload body of a request contains syntactically correct data but the data cannot be processed.
ProblemDetails	See clause 6.4 of³²	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013³³ may be returned.

Note

Since current Tacker does not support http Etag, it does not support Error Code: 412 Precondition Failed. According to the ETSI NFV SOL document, there is no API request/response specification for Etag yet, and transactions using Etag are not defined by standardization. Tacker will support Etag after the ETSI NFV specification defines relevant transactions.

Attribute name (ThresholdModifications)	Data type	Cardinality	Description
callbackUri	Uri	0..1	New value of the "callbackUri" attribute. The value "null" is not permitted.

The authentication parameter shall not be present in response bodies.

Name: Delete a threshold
Description: Delete the threshold in the Tacker
Method type: DELETE
URL for the resource: /vnfpm/v2/thresholds/{thresholdId}
Path parameters:

Name	Cardinality	Description
thresholdId	1	Threshold ID.

Request:

Data type	Cardinality	Description
n/a

Response:

Data type	Cardinality	Response Codes	Description
n/a		Success: 204	Shall be returned when the threshold has been deleted successfully.
ProblemDetails	See clause 6.4 of³⁴	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013³⁵ may be returned.

Name: Notify about PM related events
Description: Delivers a notification regarding a threshold crossing event.
Method type: POST
URL for the resource: <Client URI for notifications>
Request:

Data type	Cardinality	Description
ThresholdCrossedNotification	1	Notification about threshold crossing

Attribute name (ThresholdCrossedNotification)	Data type	Cardinality	Description
id	Identifier	1	Identifier of this notification. If a notification is sent multiple times due to multiple subscriptions, the "id" attribute of all these notifications shall have the same value.
notificationType	String	1	Discriminator for the different notification types. Shall be set to "ThresholdCrossedNotification for this notification type.
timeStamp	DateTime	1	Date and time of the generation of the notification.
thresholdId	Identifier	1	Identifier of the threshold for which has been crossed.
crossingDirection	CrossingDirectionType	1	An indication of whether the threshold was crossed in upward or downward direction.
objectType	String	1	Type of the measured object. The applicable measured object type for a measurement is defined in clause 7.2 of ETSI GS NFV-IFA 027³⁶.
objectInstanceId	Identifier	1	Identifier of the measured object instance as per clause 6.2 of ETSI GS NFV-IFA 027³⁷.
subObjectInstanceId	IdentifierInVnf	0..1	Identifiers of the sub-object instances of the measured object instance for which the measurements have been taken. Shall be present if the related threshold has been set up to measure only a subset of all sub-object instances of the measured object instance and a sub-object is defined in clause 6.2 of ETSI GS NFV-IFA 027³⁸ for the related measured object type. Shall be absent otherwise.
performanceMetric	String	1	Name of the metric collected. This attribute shall contain the related "Measurement Name" value as defined in clause 7.2 of ETSI GS NFV-IFA 027³⁹.
performanceValue	(any type)	1	Value of the metric that resulted in threshold crossing. This attribute shall contain the related "Measurement Name" value as defined in clause 7.2 of ETSI GS NFV-IFA 027⁴⁰. Measurement context information related to the measured value. The set of applicable keys is defined per measurement in the related "Measurement Context" in clause 7.2 of ETSI GS NFV-IFA 027⁴¹.
context	KeyValuePairs	0..1	Measurement context information related to the measured value. The set of applicable keys is defined per measurement in the related "Measurement Context" in clause 7.2 of ETSI GS NFV-IFA 027⁴².
_links	Structure	1	Links to resources related to this notification.
>objectInstance	NotificationLink	0..1	Link to the resource representing the measured object instance to which the notification applies. Shall be present if the measured object instance information is accessible as a resource.
>threshold	NotificationLink	1	Link to the resource that represents the threshold that was crossed.

Response:

Data type	Cardinality	Response Codes	Description
n/a		Success: 204	Shall be returned when the notification has been delivered successfully.
ProblemDetails	See clause 6.4 of⁴³	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013⁴⁴ may be returned.

Name: Test the notification endpoint
Description: Confirm that the URI of Client is correct.
Method type: GET
URL for the resource: <Client URI for notifications>
Request:

Data type	Cardinality	Description
n/a

Response:

Data type	Cardinality	Response Codes	Description
n/a		Success: 204	Shall be returned to indicate that the notification endpoint has been tested successfully.
ProblemDetails	See clause 6.4 of⁴⁵	Error: 4xx/5xx	In addition to the response codes defined above, any common error response code as defined in clause 6.4 of ETSI GS NFV-SOL 013⁴⁶ may be returned.

The following RESTful APIs are Tacker specific interfaces used for PM Threshold between Tacker and External Monitoring Tool.

Name: Send a PM Threshold event
Description: Receive the PM Threshold event sent from External Monitoring Tool
Method type: POST
URL for the resource: /pm_threshold
Request:

Data type	Cardinality	Description
ThresholdEvent	1	The PM Thresholdevent sent from External Monitoring Tool

Attribute name (ThresholdEvent)	Data type	Cardinality	Description
alerts	Structure	1..N	List of all alert objects in this group.
>status	String	1	Defines whether or not the alert is resolved or currently firing.
>labels	Structure	1	A set of labels to be attached to the alert.
>>receiver_type	String	1	Type of receiver: tacker
>>function_type	String	1	Type of function: vnfpm-threshold
>>threshold_id	Identifier	1	Identifier of the PM Threshold
>>object_instance_id	Identifier	1	Identifier of the measured object instance for which the performance metric is reported.
>>sub_object_instance_id	Identifier	0..1	Identifier of the measured object sub instance for which the performance metric is reported.
>annotations	Structure	1	A set of annotations for the alert.
>>value	(any type)	0..1	Value of the metric collected.
>startsAt	DateTime	1	The time the alert started firing.
>endsAt	DateTime	0..1	The end time of an alert.
>fingerprint	String	1	Fingerprint that can be used to identify the alert.

Security impact

None

Notifications impact

Performance Management:

Tacker sends POST <Client URI for notifications> to NFVO or EM to notify Client that Tacker received a PM threshold related event.
Tacker sends GET <Client URI for notifications> to NFVO or EM to confirm that the URI of Client is correct.
Tacker creates prometheus rule files related to PM threshold requests and upload these files using SSH.

Other end user impact

None

Performance Impact

None

Other deployer impact

None

Developer impact

None

Implementation

Assignee(s)

Primary assignee:

Yuta Kazato <yuta.kazato.nw@hco.ntt.co.jp>

Kenta Fukaya <kenta.fukaya.xv@hco.ntt.co.jp>

Other contributors:

Koji Shimizu <shimizu.koji@fujitsu.com>

Yoshiyuki Katada <katada.yoshiyuk@fujitsu.com>

Work Items

Implement Tacker to support:
- Performance Management interface
  - Add new Rest API POST /vnfpm/v2/thresholds to create a threshold.
  - Add new Rest API GET /vnfpm/v2/thresholds to get all thresholds.
  - Add new Rest API GET /vnfpm/v2/thresholds/{thresholdId} to get the specified threshold.
  - Add new Rest API PATCH /vnfpm/v2/thresholds/{thresholdId} to update target threshold callback.
  - Add new Rest API DELETE /vnfpm/v2/thresholds/{thresholdId} to delete the specified threshold.
  - Add new request POST <Client URI for notifications> to notify Client that Tacker received a threshold alerm.
  - Add new request GET <Client URI for notifications> to confirm that the URI of Client is correct.
- External Monitoring interface
  - Add new Rest API POST /pm_threshold to receive the PM threshold event sent from External Monitoring Tool.
Add new unit and functional tests.

Dependencies

None.

Testing

Unit and functional tests will be added to cover cases required in the spec.

Documentation Impact

Add Threshold examination to Tacker User guide.
Update API documentation on the API additionsmentioned in REST API impact.

43 KiB Raw Permalink Blame History

Support Thresholds resource in PM Interface

Problem description

Proposed change

AutoScale on PM threshold event trigger

Design of scale operation in PM Threshold

Request parameters for operation in PM Threshold

Sequence for operation in PM threshold

Alternatives

Data model impact

REST API impact

Security impact

Notifications impact

Other end user impact

Performance Impact

Other deployer impact

Developer impact

Implementation

Assignee(s)

Work Items

Dependencies

Testing

Documentation Impact

References

43 KiB

Raw Permalink Blame History